[PATCH v2 7/7] ARM: at91/dt: enable the LCD panel on sama5d3xek boards
flat view
From: Bo Shen <hidden>
Date: 2014-06-19 07:12:39
Also in:
dri-devel, linux-devicetree, linux-pwm, lkml
Hi Boris, On 06/10/2014 12:04 AM, Boris BREZILLON wrote:
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index cbd6a3f..f2ab41d 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts@@ -36,9 +36,33 @@ macb0: ethernet at f0028000 { status = "okay"; }; + + hlcdc: hlcdc at f0030000 { + status = "okay"; + + hlcdc-display-controller { + atmel,panel = <&panel 3 0>;
One question here, in the driver code, it will configuration the frame buffer mode depends on this parameter. So, my question is if the framebuffer bits per pixel is different with output bits per pixel, how to setting it? For example, frame buffer use 16 bits/pixel, while output 24 bits/pixel.
quoted hunk ↗ jump to hunk
+ }; + }; }; };
Best Regards, Bo Shen