[PATCH v2 1/7] mfd: add atmel-hlcdc driver

On Mon, 16 Jun 2014, Boris BREZILLON wrote:

On 16/06/2014 14:50, Lee Jones wrote:

quoted

quoted

The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip

Add support for the MFD device which will just retrieve HLCDC clocks and
create a regmap so that subdevices can access the HLCDC register range
concurrently.

Signed-off-by: Boris BREZILLON <redacted>
---
 .../devicetree/bindings/mfd/atmel-hlcdc.txt        |  41 ++++++++
 drivers/mfd/Kconfig                                |  11 ++
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/atmel-hlcdc.c                          | 116 +++++++++++++++++++++
 include/linux/mfd/atmel-hlcdc.h                    |  78 ++++++++++++++
 5 files changed, 247 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
 create mode 100644 drivers/mfd/atmel-hlcdc.c
 create mode 100644 include/linux/mfd/atmel-hlcdc.h

diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 0000000..f5b69cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt

[...]

quoted

quoted

+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-dc";
+			interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;

I assume you're using the 3rd parameter for flags.  If so, please use
the defines.

No, the third parameter encodes the irq priority (from 0 to 7 IIRC).

Ah okay.  Can you point me to the documentation for this IRQ
controller please?  I'd like to have a quick peek.  It might be worth
defining the priority to prevent confusion, also you definitely should
document it in your binding.

[...]

quoted

quoted

+static struct platform_driver atmel_hlcdc_driver = {
+	.probe = atmel_hlcdc_probe,
+	.remove = atmel_hlcdc_remove,
+	.driver = {
+		.name = "atmel-hlcdc",
+		.owner = THIS_MODULE,
+		.of_match_table = atmel_hlcdc_match,

Is this driver DT only?

Yes it is.

So it should depend on OF in the Kconfig entry.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog