The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a
N multiplier factor that starts from 1, not 0.

This patch adds an option to the clock driver's config data structures
to define the difference.

Signed-off-by: Chen-Yu Tsai <redacted>
Acked-by: Maxime Ripard <redacted>
---
 drivers/clk/sunxi/clk-factors.c | 5 ++++-
 drivers/clk/sunxi/clk-factors.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 3806d97..399cf4d 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c

@@ -62,7 +62,10 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
                p = FACTOR_GET(config->pshift, config->pwidth, reg);

        /* Calculate the rate */
-       rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+       if (config->n_from_one)
+               rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
+       else
+               rate = (parent_rate * n * (k + 1) >> p) / (m + 1);