[PATCH v2 0/7] mfd: twl4030-power: Enable off-idle configuration when booted with device tree

Here's an updated set of patches to enable low-power idle modes
for some omap3 boards when booted with device tree.

This series when applied on top of the patches in tread                                                                                                       
"[PATCH 00/11] Fixes for omap PM for making omap3 DT only",
or omap-for-v3.16/pm branch.

Lee, if these patches look OK to you, please feel free to 
pick them, preferrably to the immutable branch you already
have set up so I can also merge them in to be able to have
things working in my branch properly for PM.

Okay, it looks like this series is good to go now.  If you believe so
too, give me the nod and I'll apply.

Tony Lindgren (7):
  mfd: twl4030-power: Fix hang on reboot if sleep configuration was
    loaded earlier
  mfd: twl4030-power: Fix some defines for SW_EVENTS
  mfd: twl4030-power: Add generic reset configuration
  mfd: twl4030-power: Add recommended idle configuration
  mfd: twl4030-power: Add support for board specific configuration
  mfd: twl4030power: Add a configuration to turn off oscillator during
    off-idle
  ARM: dts: Enable twl4030 off-idle configuration for selected omaps

 .../devicetree/bindings/mfd/twl4030-power.txt      |  17 +-
 arch/arm/boot/dts/omap3-beagle-xm.dts              |   6 +
 arch/arm/boot/dts/omap3-evm-common.dtsi            |   7 +
 arch/arm/boot/dts/omap3-n900.dts                   |   5 +
 drivers/mfd/twl4030-power.c                        | 269 +++++++++++++++++++--
 include/linux/i2c/twl.h                            |   4 +
 6 files changed, 284 insertions(+), 24 deletions(-)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog