2014-05-26 15:45 GMT+02:00 Georgi Djakov [off-list ref]:

On 23.05.14, 19:39, Matthias Brugger wrote:

quoted

2014-05-23 17:12 GMT+02:00 Georgi Djakov [off-list ref]:

quoted

Add information about the APQ8084 debug UART physical and virtual
addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
Requires: https://lkml.org/lkml/2014/4/14/312

Signed-off-by: Georgi Djakov <redacted>
---
 arch/arm/Kconfig.debug |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 40ee328..e71723d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug

@@ -376,6 +376,7 @@ choice
                  their output to the serial port on Qualcomm devices.

                  ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
+                 APQ8084   0xf995e000        0xfa75e000
                  MSM8X60   0x19c40000        0xf0040000
                  MSM8960   0x16440000        0xf0040000
                  MSM8974   0xf991e000        0xfa71e000

You don't have any uart defined in your dts. You should add them
before any adding low level debug support.
Otherwise there might be problems in booting a multi-platform kernel.

Thanks for the comment! As the uart depends on clocks, i am adding it to the
dts as part of my global clock controller patchset [1].
In this patch i am just adding some information to the help section.
Do you see any problem with this?

Are the patches for the clock controller applied already?
If not, I would consider to add this patch to clock controller series.

Cheers,
Matthias

[1] https://lkml.org/lkml/2014/5/22/422

Thanks,
Georgi

-- 
motzblog.wordpress.com