[PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: 2014-05-23 16:39:42
Also in:
linux-arm-msm, linux-devicetree, lkml
2014-05-23 17:12 GMT+02:00 Georgi Djakov [off-list ref]:
quoted hunk ↗ jump to hunk
Add information about the APQ8084 debug UART physical and virtual addresses in the DEBUG_QCOM_UARTDM Kconfig help section. Requires: https://lkml.org/lkml/2014/4/14/312 Signed-off-by: Georgi Djakov <redacted> --- arch/arm/Kconfig.debug | 1 + 1 file changed, 1 insertion(+)diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 40ee328..e71723d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug@@ -376,6 +376,7 @@ choice their output to the serial port on Qualcomm devices. ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 MSM8974 0xf991e000 0xfa71e000
You don't have any uart defined in your dts. You should add them before any adding low level debug support. Otherwise there might be problems in booting a multi-platform kernel. Regards, Matthias
-- 1.7.9.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- motzblog.wordpress.com