[PATCH 2/3] dts: socfpga: Fix ethernet entries for the stmmac

On Tue, 2014-03-25 at 18:34 -0500, dinguyen at altera.com wrote:

-			#size-cells = <1>;
-			compatible = "altr,socfpga-stmmac";
-			altr,sysmgr-syscon = <&sysmgr 0x60>;
+		gmac0: ethernet at ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			status = "disabled";
-			ranges;
-
-			gmac0: gmac0 at ff700000 {
-				compatible = "snps,dwmac-3.70a", "snps,dwmac";
-				reg = <0xff700000 0x2000>;
-				interrupts = <0 115 4>;
-				interrupt-names = "macirq";
-				mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-				clocks = <&emac0_clk>;
-				clock-names = "stmmaceth";
-			};
+			altr,sysmgr-syscon = <&sysmgr 0x60>;
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac0_clk>;
+			clock-names = "stmmaceth";
 		};

not strictly related to this patch, but noticed in bypassing:

is the 'clocks' spec correct?  ISTR that 'emac0_clk' is the PLL
output, while the gated clock for the EMAC IP block is named
'emac_0_clk' (note the extra underscore)


virtually yours
Gerhard Sittig
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de