[PATCH v2 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB
From: ezequiel@vanguardiasur.com.ar (Ezequiel Garcia)
Date: 2014-03-13 19:39:01
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2014-03-13 · Re: [PATCH v2 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB · Sergei Shtylyov <hidden>
- 2014-03-13 · Re: [PATCH v2 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB · Ezequiel Garcia <hidden>
From: Ezequiel Garcia <redacted> The Armada 385-DB board has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images. Signed-off-by: Ezequiel Garcia <redacted> --- arch/arm/boot/dts/armada-385-db.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 9a13642..edcf7ff 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts@@ -80,6 +80,27 @@ reg = <1>; }; }; + + flash: flash at d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition at 0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition at 800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition at 1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; pcie-controller {
--
1.9.0