[PATCH v2 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB
From: Sergei Shtylyov <hidden>
Date: 2014-03-13 20:53:40
Also in:
linux-devicetree
On 03/13/2014 10:39 PM, Ezequiel Garcia wrote:
From: Ezequiel Garcia <redacted>
The Armada 385-DB board has a NAND flash, so enable it in the devicetree and add the partitions as prepared in the factory images.
Signed-off-by: Ezequiel Garcia <redacted> --- arch/arm/boot/dts/armada-385-db.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
quoted hunk
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index 9a13642..edcf7ff 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts@@ -80,6 +80,27 @@ reg = <1>; }; }; + + flash: flash at d0000 {
Note that you don't have to label your device the same way as it's named,
i.e. you could have labelled it "nand" if it would make things clearer.
Although I don't readily see the value of labeling nodes in the board's
.dts file. Do you really expect to refer to it somewhere?
WBR, Sergei