[PATCH RFC v2 08/11] tty: xuartps: Rename Kconfig symbols
From: Soren Brinkmann <hidden>
Date: 2014-03-07 19:15:56
Also in:
linux-serial, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Rename the config symbols for the Cadence UART to reflect the driver rebranding: SERIAL_XILINX_PS_UART(_CONSOLE) -> SERIAL_CADENCE_UART(_CONSOLE) Signed-off-by: Soren Brinkmann <redacted> --- drivers/tty/serial/Kconfig | 6 +++--- drivers/tty/serial/Makefile | 2 +- drivers/tty/serial/xilinx_uartps.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1294284342bc..8c340dbf9e53 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig@@ -1367,7 +1367,7 @@ config SERIAL_MXS_AUART_CONSOLE help Enable a MXS AUART port to be the system console. -config SERIAL_XILINX_PS_UART +config SERIAL_CADENCE_UART tristate "Cadence (Xilinx Zynq) UART support" depends on OF select SERIAL_CORE
@@ -1375,9 +1375,9 @@ config SERIAL_XILINX_PS_UART This driver supports the Cadence UART. It is found e.g. in Xilinx Zynq. -config SERIAL_XILINX_PS_UART_CONSOLE +config SERIAL_CADENCE_UART_CONSOLE bool "Cadence UART console support" - depends on SERIAL_XILINX_PS_UART=y + depends on SERIAL_CADENCE_UART=y select SERIAL_CORE_CONSOLE help Enable a Cadence UART port to be the system console.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..4b57523a34c7 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile@@ -79,7 +79,7 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o -obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o +obj-$(CONFIG_SERIAL_CADENCE_UART) += xilinx_uartps.o obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 0b27efef1cb6..7bfd19a7273d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c@@ -13,7 +13,7 @@ * still shows in the file name, function/symbol name prefixes. */ -#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_CADENCE_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif
@@ -1030,7 +1030,7 @@ static struct uart_port *cdns_uart_get_port(void) return port; } -#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE +#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE /** * cdns_uart_console_wait_tx - Wait for the TX to be full * @port: Handle to the uart port structure
@@ -1150,7 +1150,7 @@ static int __init cdns_uart_console_init(void) console_initcall(cdns_uart_console_init); -#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */ +#endif /* CONFIG_SERIAL_CADENCE_UART_CONSOLE */ static struct uart_driver cdns_uart_uart_driver = { .owner = THIS_MODULE,
@@ -1159,7 +1159,7 @@ static struct uart_driver cdns_uart_uart_driver = { .major = CDNS_UART_MAJOR, .minor = CDNS_UART_MINOR, .nr = CDNS_UART_NR_PORTS, -#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE +#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE .cons = &cdns_uart_console, #endif };
--
1.9.0.1.g4196000