[PATCH 12/12] ARM: dts: dra7: add OCP2SCP3 and SATA nodes
From: Roger Quadros <hidden>
Date: 2014-03-03 15:09:13
Also in:
linux-devicetree, linux-ide, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Balaji T K <redacted> Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY. [Roger Q] Clean up. CC: Benoit Cousson <redacted> Signed-off-by: Balaji T K <redacted> Signed-off-by: Roger Quadros <redacted> --- arch/arm/boot/dts/dra7.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa..74e44bc 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi@@ -621,6 +621,45 @@ dma-names = "tx0", "rx0"; status = "disabled"; }; + + omap_control_sata: control-phy at 4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp at 4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy at 4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata at 4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; }; };
--
1.8.3.2