[PATCH 10/12] phy: ti-pipe3: Fix suspend/resume and module reload
From: Roger Quadros <hidden>
Date: 2014-03-03 15:08:56
Also in:
linux-devicetree, linux-ide, linux-omap, lkml
Subsystem:
generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
Due to Errata i783, SATA breaks if its DPLL is idled. The recommeded workaround to issue a softreset to the SATA controller doesn't seem to work. Here we just prevent SATA DPLL from Idling and hence avoid the issue altogether. Signed-off-by: Roger Quadros <redacted> --- drivers/phy/phy-ti-pipe3.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index d3c085a..611f7c3 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c@@ -238,6 +238,10 @@ static int ti_pipe3_exit(struct phy *x) u32 val; unsigned long timeout; + /* SATA DPLL can't be powered down due to Errata i783 */ + if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) + return 0; + /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE;
--
1.8.3.2