[PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support
From: Thomas Abraham <hidden>
Date: 2014-01-21 08:08:43
Also in:
linux-samsung-soc
Hi Lukasz, On Mon, Jan 20, 2014 at 1:38 PM, Lukasz Majewski [off-list ref] wrote:
Hi Thomas,quoted
From: Thomas Abraham <redacted> Exynos4210, Exynos4x12 and Exynos5250 based platforms have switched over to use cpufreq-cpu0 driver for cpufreq functionality. So the Exynos specific cpufreq drivers for these platforms can be removed. Cc: Kukjin Kim <redacted> Cc: Jaecheol Lee <redacted> Signed-off-by: Thomas Abraham <redacted> --- drivers/cpufreq/Kconfig.arm | 36 ---- drivers/cpufreq/Makefile | 4 - drivers/cpufreq/exynos-cpufreq.c | 292 ---------------------------------- drivers/cpufreq/exynos-cpufreq.h | 91 ----------- drivers/cpufreq/exynos4210-cpufreq.c | 157 ------------------ drivers/cpufreq/exynos4x12-cpufreq.c | 211 ------------------------ drivers/cpufreq/exynos5250-cpufreq.c | 183 --------------------- 7 files changed, 0 insertions(+), 974 deletions(-) delete mode 100644 drivers/cpufreq/exynos-cpufreq.c delete mode 100644 drivers/cpufreq/exynos-cpufreq.h delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.cdiff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 3129749..704656d 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm@@ -16,42 +16,6 @@ config ARM_DT_BL_CPUFREQ This enables probing via DT for Generic CPUfreq driver forARM big.LITTLE platform. This gets frequency tables from DT. -config ARM_EXYNOS_CPUFREQ - bool - -config ARM_EXYNOS4210_CPUFREQ - bool "SAMSUNG EXYNOS4210" - depends on CPU_EXYNOS4210 - default y - select ARM_EXYNOS_CPUFREQ - help - This adds the CPUFreq driver for Samsung EXYNOS4210 - SoC (S5PV310 or S5PC210). - - If in doubt, say N. - -config ARM_EXYNOS4X12_CPUFREQ - bool "SAMSUNG EXYNOS4x12" - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) - default y - select ARM_EXYNOS_CPUFREQ - help - This adds the CPUFreq driver for Samsung EXYNOS4X12 - SoC (EXYNOS4212 or EXYNOS4412). - - If in doubt, say N. - -config ARM_EXYNOS5250_CPUFREQ - bool "SAMSUNG EXYNOS5250" - depends on SOC_EXYNOS5250 - default y - select ARM_EXYNOS_CPUFREQ - help - This adds the CPUFreq driver for Samsung EXYNOS5250 - SoC. - - If in doubt, say N. - config ARM_EXYNOS5440_CPUFREQ bool "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 7494565..3abfe05 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile@@ -49,10 +49,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) +=arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.odiff --git a/drivers/cpufreq/exynos-cpufreq.cb/drivers/cpufreq/exynos-cpufreq.c deleted file mode 100644 index fcd2914..0000000--- a/drivers/cpufreq/exynos-cpufreq.c +++ /dev/null@@ -1,292 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPU frequency scaling support for EXYNOS series - * - * This program is free software; you can redistribute it and/ormodify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/regulator/consumer.h> -#include <linux/cpufreq.h> -#include <linux/suspend.h> -#include <linux/platform_device.h> - -#include <plat/cpu.h> - -#include "exynos-cpufreq.h" - -static struct exynos_dvfs_info *exynos_info; - -static struct regulator *arm_regulator; - -static unsigned int locking_frequency; -static bool frequency_locked; -static DEFINE_MUTEX(cpufreq_lock); - -static int exynos_cpufreq_get_index(unsigned int freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - int index; - - for (index = 0; - freq_table[index].frequency != CPUFREQ_TABLE_END; index++) - if (freq_table[index].frequency == freq) - break; - - if (freq_table[index].frequency == CPUFREQ_TABLE_END) - return -EINVAL; - - return index; -} - -static int exynos_cpufreq_scale(unsigned int target_freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - unsigned int *volt_table = exynos_info->volt_table; - struct cpufreq_policy *policy = cpufreq_cpu_get(0); - unsigned int arm_volt, safe_arm_volt = 0; - unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz; - unsigned int old_freq; - int index, old_index; - int ret = 0; - - old_freq = policy->cur; - - /* - * The policy max have been changed so that we cannot get proper - * old_index with cpufreq_frequency_table_target(). Thus, ignore - * policy and get the index from the raw frequency table. - */ - old_index = exynos_cpufreq_get_index(old_freq); - if (old_index < 0) { - ret = old_index; - goto out; - } - - index = exynos_cpufreq_get_index(target_freq); - if (index < 0) { - ret = index; - goto out; - } - - /* - * ARM clock source will be changed APLL to MPLL temporary - * To support this level, need to control regulator for - * required voltage level - */ - if (exynos_info->need_apll_change != NULL) { - if (exynos_info->need_apll_change(old_index, index) && - (freq_table[index].frequency < mpll_freq_khz) && - (freq_table[old_index].frequency < mpll_freq_khz)) - safe_arm_volt = volt_table[exynos_info->pll_safe_idx]; - } - arm_volt = volt_table[index]; - - /* When the new frequency is higher than current frequency */ - if ((target_freq > old_freq) && !safe_arm_volt) { - /* Firstly, voltage up to increase frequency */ - ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, arm_volt); - return ret; - } - } - - if (safe_arm_volt) { - ret = regulator_set_voltage(arm_regulator, safe_arm_volt, - safe_arm_volt); - if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, safe_arm_volt); - return ret; - } - } - - exynos_info->set_freq(old_index, index); - - /* When the new frequency is lower than current frequency */ - if ((target_freq < old_freq) || - ((target_freq > old_freq) && safe_arm_volt)) { - /* down the voltage after frequency change */ - ret = regulator_set_voltage(arm_regulator, arm_volt, - arm_volt); - if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, arm_volt); - goto out; - } - } - -out: - cpufreq_cpu_put(policy); - - return ret; -} - -static int exynos_target(struct cpufreq_policy *policy, unsigned int index) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - int ret = 0; - - mutex_lock(&cpufreq_lock); - - if (frequency_locked) - goto out; - - ret = exynos_cpufreq_scale(freq_table[index].frequency); - -out: - mutex_unlock(&cpufreq_lock); - - return ret; -} - -#ifdef CONFIG_PM -static int exynos_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; -} - -static int exynos_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -/** - * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume - * context - * @notifier - * @pm_event - * @v - * - * While frequency_locked == true, target() ignores every frequency but - * locking_frequency. The locking_frequency value is the initial frequency, - * which is set by the bootloader. In order to eliminate possible - * inconsistency in clock values, we save and restore frequencies during - * suspend and resume and block CPUFREQ activities. Note that the standard - * suspend/resume cannot be used as they are too deep (syscore_ops) for - * regulator actions. - */ -static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, void *v) -{ - int ret; - - switch (pm_event) { - case PM_SUSPEND_PREPARE: - mutex_lock(&cpufreq_lock); - frequency_locked = true; - mutex_unlock(&cpufreq_lock); - - ret = exynos_cpufreq_scale(locking_frequency); - if (ret < 0) - return NOTIFY_BAD; - - break; - - case PM_POST_SUSPEND: - mutex_lock(&cpufreq_lock); - frequency_locked = false; - mutex_unlock(&cpufreq_lock); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block exynos_cpufreq_nb = { - .notifier_call = exynos_cpufreq_pm_notifier, -}; - -static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->clk = exynos_info->cpu_clk; - return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); -} - -static struct cpufreq_driver exynos_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = exynos_target, - .get = cpufreq_generic_get, - .init = exynos_cpufreq_cpu_init, - .exit = cpufreq_generic_exit, - .name = "exynos_cpufreq", - .attr = cpufreq_generic_attr, -#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW - .boost_supported = true, -#endif -#ifdef CONFIG_PM - .suspend = exynos_cpufreq_suspend, - .resume = exynos_cpufreq_resume, -#endif -}; - -static int exynos_cpufreq_probe(struct platform_device *pdev) -{ - int ret = -EINVAL; - - exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); - if (!exynos_info) - return -ENOMEM; - - if (soc_is_exynos4210()) - ret = exynos4210_cpufreq_init(exynos_info); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - ret = exynos4x12_cpufreq_init(exynos_info); - else if (soc_is_exynos5250()) - ret = exynos5250_cpufreq_init(exynos_info); - else - return 0; - - if (ret) - goto err_vdd_arm; - - if (exynos_info->set_freq == NULL) { - pr_err("%s: No set_freq function (ERR)\n", __func__); - goto err_vdd_arm; - } - - arm_regulator = regulator_get(NULL, "vdd_arm"); - if (IS_ERR(arm_regulator)) { - pr_err("%s: failed to get resource vdd_arm\n", __func__); - goto err_vdd_arm; - } - - locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - - register_pm_notifier(&exynos_cpufreq_nb); - - if (cpufreq_register_driver(&exynos_driver)) { - pr_err("%s: failed to register cpufreq driver\n", __func__); - goto err_cpufreq; - } - - return 0; -err_cpufreq: - unregister_pm_notifier(&exynos_cpufreq_nb); - - regulator_put(arm_regulator); -err_vdd_arm: - kfree(exynos_info); - return -EINVAL; -} - -static struct platform_driver exynos_cpufreq_platdrv = { - .driver = { - .name = "exynos-cpufreq", - .owner = THIS_MODULE, - }, - .probe = exynos_cpufreq_probe, -}; -module_platform_driver(exynos_cpufreq_platdrv);diff --git a/drivers/cpufreq/exynos-cpufreq.hb/drivers/cpufreq/exynos-cpufreq.h deleted file mode 100644 index 3ddade8..0000000--- a/drivers/cpufreq/exynos-cpufreq.h +++ /dev/null@@ -1,91 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPUFreq support - * - * This program is free software; you can redistribute it and/ormodify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum cpufreq_level_index { - L0, L1, L2, L3, L4, - L5, L6, L7, L8, L9, - L10, L11, L12, L13, L14, - L15, L16, L17, L18, L19, - L20, -}; - -#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ - { \ - .freq = (f) * 1000, \ - .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ - (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ - .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ - .mps = ((m) << 16 | (p) << 8 | (s)), \ - } - -struct apll_freq { - unsigned int freq; - u32 clk_div_cpu0; - u32 clk_div_cpu1; - u32 mps; -}; - -struct exynos_dvfs_info { - unsigned long mpll_freq_khz; - unsigned int pll_safe_idx; - struct clk *cpu_clk; - unsigned int *volt_table; - struct cpufreq_frequency_table *freq_table; - void (*set_freq)(unsigned int, unsigned int); - bool (*need_apll_change)(unsigned int, unsigned int); -}; - -#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ -extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif -#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ -extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif -#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ -extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif - -#include <plat/cpu.h> -#include <mach/map.h> - -#define EXYNOS4_CLKSRC_CPU (S5P_VA_CMU + 0x14200) -#define EXYNOS4_CLKMUX_STATCPU (S5P_VA_CMU + 0x14400) - -#define EXYNOS4_CLKDIV_CPU (S5P_VA_CMU + 0x14500) -#define EXYNOS4_CLKDIV_CPU1 (S5P_VA_CMU + 0x14504) -#define EXYNOS4_CLKDIV_STATCPU (S5P_VA_CMU + 0x14600) -#define EXYNOS4_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x14604) - -#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) - -#define EXYNOS5_APLL_LOCK (S5P_VA_CMU + 0x00000) -#define EXYNOS5_APLL_CON0 (S5P_VA_CMU + 0x00100) -#define EXYNOS5_CLKMUX_STATCPU (S5P_VA_CMU + 0x00400) -#define EXYNOS5_CLKDIV_CPU0 (S5P_VA_CMU + 0x00500) -#define EXYNOS5_CLKDIV_CPU1 (S5P_VA_CMU + 0x00504) -#define EXYNOS5_CLKDIV_STATCPU0 (S5P_VA_CMU + 0x00600) -#define EXYNOS5_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x00604) diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c deleted file mode 100644 index 40d84c4..0000000 --- a/drivers/cpufreq/exynos4210-cpufreq.c+++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4210 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/ormodify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; - -static unsigned int exynos4210_volt_table[] = { - 1250000, 1150000, 1050000, 975000, 950000, -}; - -static struct cpufreq_frequency_table exynos4210_freq_table[] = { - {L0, 1200 * 1000}, - {L1, 1000 * 1000}, - {L2, 800 * 1000}, - {L3, 500 * 1000}, - {L4, 200 * 1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_4210[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1), - APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1), - APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1), - APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2), - APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3), -}; - -static void exynos4210_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_4210[div_index].clk_div_cpu0; - - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU); - } while (tmp & 0x1111111); - - /* Change Divider - CPU1 */ - - tmp = apll_freq_4210[div_index].clk_div_cpu1; - - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1); - } while (tmp & 0x11); -} - -static void exynos4210_set_apll(unsigned int index) -{ - unsigned int tmp, freq = apll_freq_4210[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU) - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU); - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4210_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - exynos4210_set_clkdiv(new_index); - exynos4210_set_apll(new_index); - } else if (old_index < new_index) { - exynos4210_set_apll(new_index); - exynos4210_set_clkdiv(new_index); - } -} - -int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) -{ - unsigned long rate; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L2; - info->cpu_clk = cpu_clk; - info->volt_table = exynos4210_volt_table; - info->freq_table = exynos4210_freq_table; - info->set_freq = exynos4210_set_frequency; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_debug("%s: failed initialization\n", __func__); - return -EINVAL; -}diff --git a/drivers/cpufreq/exynos4x12-cpufreq.cb/drivers/cpufreq/exynos4x12-cpufreq.c deleted file mode 100644 index 7c11ace..0000000--- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ /dev/null@@ -1,211 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4X12 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/ormodify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; - -static unsigned int exynos4x12_volt_table[] = { - 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500, - 1000000, 987500, 975000, 950000, 925000, 900000, 900000 -}; - -static struct cpufreq_frequency_table exynos4x12_freq_table[] = { - {CPUFREQ_BOOST_FREQ, 1500 * 1000},Here, you are removing BOOST support for Exynos4412, without any code, which brings back this functionality in the new code.
Sorry, I did not notice this new feature in here.
I'd propose adding new property to cpus node and during operating-points parsing mark the entry at the cpufreq_frequency_table accordingly.
Okay, would you be adding support for this or do you want me to do this? Thanks, Thomas.
quoted
- {L1, 1400 * 1000}, - {L2, 1300 * 1000}, - {L3, 1200 * 1000}, - {L4, 1100 * 1000}, - {L5, 1000 * 1000}, - {L6, 900 * 1000}, - {L7, 800 * 1000}, - {L8, 700 * 1000}, - {L9, 600 * 1000}, - {L10, 500 * 1000}, - {L11, 400 * 1000}, - {L12, 300 * 1000}, - {L13, 200 * 1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq *apll_freq_4x12; - -static struct apll_freq apll_freq_4212[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2), -}; - -static struct apll_freq apll_freq_4412[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, CORES - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2), -}; - -static void exynos4x12_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - unsigned int stat_cpu1; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_4x12[div_index].clk_div_cpu0; - - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU); - - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_4x12[div_index].clk_div_cpu1; - - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1); - if (soc_is_exynos4212()) - stat_cpu1 = 0x11; - else - stat_cpu1 = 0x111; - - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1) - cpu_relax(); -} - -static void exynos4x12_set_apll(unsigned int index) -{ - unsigned int tmp, freq = apll_freq_4x12[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU) - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU); - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4x12_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - exynos4x12_set_clkdiv(new_index); - exynos4x12_set_apll(new_index); - } else if (old_index < new_index) { - exynos4x12_set_apll(new_index); - exynos4x12_set_clkdiv(new_index); - } -} - -int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - unsigned long rate; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - if (soc_is_exynos4212()) - apll_freq_4x12 = apll_freq_4212; - else - apll_freq_4x12 = apll_freq_4412; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L7; - info->cpu_clk = cpu_clk; - info->volt_table = exynos4x12_volt_table; - info->freq_table = exynos4x12_freq_table; - info->set_freq = exynos4x12_set_frequency; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_debug("%s: failed initialization\n", __func__); - return -EINVAL; -}diff --git a/drivers/cpufreq/exynos5250-cpufreq.cb/drivers/cpufreq/exynos5250-cpufreq.c deleted file mode 100644 index 5f90b82..0000000--- a/drivers/cpufreq/exynos5250-cpufreq.c +++ /dev/null@@ -1,183 +0,0 @@ -/* - * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS5250 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/ormodify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> - -#include <mach/map.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; - -static unsigned int exynos5250_volt_table[] = { - 1300000, 1250000, 1225000, 1200000, 1150000, - 1125000, 1100000, 1075000, 1050000, 1025000, - 1012500, 1000000, 975000, 950000, 937500, - 925000 -}; - -static struct cpufreq_frequency_table exynos5250_freq_table[] = { - {L0, 1700 * 1000}, - {L1, 1600 * 1000}, - {L2, 1500 * 1000}, - {L3, 1400 * 1000}, - {L4, 1300 * 1000}, - {L5, 1200 * 1000}, - {L6, 1100 * 1000}, - {L7, 1000 * 1000}, - {L8, 900 * 1000}, - {L9, 800 * 1000}, - {L10, 700 * 1000}, - {L11, 600 * 1000}, - {L12, 500 * 1000}, - {L13, 400 * 1000}, - {L14, 300 * 1000}, - {L15, 200 * 1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_5250[] = { - /* - * values: - * freq - * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0), - APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0), - APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2), -}; - -static void set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_5250[div_index].clk_div_cpu0; - - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0); - - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_5250[div_index].clk_div_cpu1; - - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1); - - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11) - cpu_relax(); -} - -static void set_apll(unsigned int index) -{ - unsigned int tmp; - unsigned int freq = apll_freq_5250[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU); - tmp &= (0x7 << 16); - } while (tmp != (0x1 << 16)); -} - -static void exynos5250_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - set_clkdiv(new_index); - set_apll(new_index); - } else if (old_index < new_index) { - set_apll(new_index); - set_clkdiv(new_index); - } -} - -int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - unsigned long rate; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "mout_cpu"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L9; - info->cpu_clk = cpu_clk; - info->volt_table = exynos5250_volt_table; - info->freq_table = exynos5250_freq_table; - info->set_freq = exynos5250_set_frequency; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_err("%s: failed initialization\n", __func__); - return -EINVAL; -}-- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group