Thread (26 messages) 26 messages, 5 authors, 2014-02-03

NFS client broken in Linus' tip

From: Russell King - ARM Linux <hidden>
Date: 2014-01-30 14:31:01
Also in: linux-nfs, lkml

On Thu, Jan 30, 2014 at 09:17:00AM -0500, Trond Myklebust wrote:
On Jan 30, 2014, at 9:08, Russell King - ARM Linux [off-list ref] wrote:
quoted
I just booted Linus' tip (plus a few other patches to imx-drm and imx
code), and stumbled into this interesting scenario:

# touch test
touch: cannot touch `test': Operation not supported

I also tried mkdir and mknod, all result in the same error.  Hard and
symlinks links are creatable.

However, I can chmod existing files and rename them.  Files can also be
deleted, and the combination of this has left me without a /etc/mtab !

The machine is a iMX6 based ARM, running root-nfs, which was mounted via
ubuntu's initramfs (so not using the kernel's built-in root-nfs.)

/proc/mounts for the root mount gives:
192.168.1.123:/var/boot/ci / nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,nolock,proto=tcp,port=2049,timeo=7,retrans=10,sec=sys,local_lock=all,addr=192.168.1.123 0 0

CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y

tcpdumping, I see:

13:59:51.713523 IP 192.168.1.252.1341245608 > 192.168.1.123.2049: 132 lookup fh Unknown/010007011040840000000000CC238FC8FBA0475D9D9F8356B4C44166CDC38700 "test"
13:59:51.714345 IP 192.168.1.123.2049 > 192.168.1.252.1341245608: reply ok 120 lookup ERROR: No such file or directory
13:59:51.751303 IP 192.168.1.252.797 > 192.168.1.123.nfs: . ack 3381 win 2625 <nop,nop,timestamp 474136 3431312924>

which is the only NFS packet(s) I see which mention "test".

and stracing touch:

open("test", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK|O_LARGEFILE, 0666) = -1 EOPNOTSUPP (Operation not supported)
utimensat(AT_FDCWD, "test", NULL, 0)    = -1 ENOENT (No such file or directory)
write(2, "touch: ", 7touch: )                  = 7
write(2, "cannot touch `test'", 19cannot touch `test')     = 19
write(2, ": Operation not supported", 25: Operation not supported) = 25
write(2, "\n", 1
)                       = 1

I think it's down to this:

commit 013cdf1088d7235da9477a2375654921d9b9ba9f
Author: Christoph Hellwig [off-list ref]
Date:   Fri Dec 20 05:16:53 2013 -0800

   nfs: use generic posix ACL infrastructure for v3 Posix ACLs

   This causes a small behaviour change in that we don't bother to set
   ACLs on file creation if the mode bit can express the access permissions
   fully, and thus behaving identical to local filesystems.

   Signed-off-by: Christoph Hellwig [off-list ref]
   Signed-off-by: Al Viro [off-list ref]

which adds:

+       status = posix_acl_create(dir, &sattr->ia_mode, &default_acl, &acl);
+       if (status)
+               goto out;
Right, this should clearly not cause nfs4_proc_create to fail if it
returns EOPNOTSUPP.
NFS3 :)
quoted
into nfs3_proc_create(), but this ends up calling down into nfs3_get_acl(),
which does this:

       if (!nfs_server_capable(inode, NFS_CAP_ACLS))
               return ERR_PTR(-EOPNOTSUPP);
Just for completeness sake: is the server you were running against supposed to support POSIX acls?
The server is an old 3.1.8 kernel with this NFS config:

CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y

which has worked fine with NFS clients for the last 1800 odd days... until
now.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help