[RFC PATCH v2 07/14] of: mtd: add documentation for the ONFI NAND timing mode property
From: Boris BREZILLON <hidden>
Date: 2014-01-29 14:46:04
Also in:
linux-devicetree, lkml
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add documentation for the ONFI NAND timing mode property. Signed-off-by: Boris BREZILLON <redacted> --- Documentation/devicetree/bindings/mtd/nand.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 0c962296..75e46f3 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt@@ -8,3 +8,8 @@ E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */ - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false +- onfi,nand-timing-mode: an integer encoding the ONFI timing mode of the NAND + chip. This is only used when the chip does not support the ONFI standard. + Choose the closest mode fulfilling the NAND chip timings. + For a full description of the different timing modes see this document: + www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf?
--
1.7.9.5