Thread (42 messages) 42 messages, 3 authors, 2014-02-14
STALE4496d
Revisions (5)
  1. v3 [diff vs current]
  2. v4 [diff vs current]
  3. v4 current
  4. v5 [diff vs current]
  5. v6 [diff vs current]

[PATCH RESEND v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back

From: Lee Jones <hidden>
Date: 2014-01-23 10:34:30
Also in: lkml
Subsystem: memory technology devices (mtd), the rest · Maintainers: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds

Signed-off-by: Lee Jones <redacted>
---
 drivers/mtd/devices/st_spi_fsm.c | 47 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 88017d8..ddfff35 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -339,6 +339,7 @@ struct flash_info {
 static int stfsm_n25q_config(struct stfsm *fsm);
 static int stfsm_mx25_config(struct stfsm *fsm);
 static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
 
 static struct flash_info flash_types[] = {
 	/*
@@ -444,10 +445,14 @@ static struct flash_info flash_types[] = {
 		   FLASH_FLAG_READ_1_1_4        |	\
 		   FLASH_FLAG_READ_1_4_4        |	\
 		   FLASH_FLAG_WRITE_1_1_4)
-	{ "w25q80",  0xef4014, 0,  64 * 1024,  16, W25Q_FLAG, 80, NULL },
-	{ "w25q16",  0xef4015, 0,  64 * 1024,  32, W25Q_FLAG, 80, NULL },
-	{ "w25q32",  0xef4016, 0,  64 * 1024,  64, W25Q_FLAG, 80, NULL },
-	{ "w25q64",  0xef4017, 0,  64 * 1024, 128, W25Q_FLAG, 80, NULL },
+	{ "w25q80",  0xef4014, 0,  64 * 1024,  16, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q16",  0xef4015, 0,  64 * 1024,  32, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q32",  0xef4016, 0,  64 * 1024,  64, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q64",  0xef4017, 0,  64 * 1024, 128, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
 
 	/* Sentinel */
 	{ NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
@@ -575,6 +580,11 @@ static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
 	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
 };
 
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE			(0x1 << 9)
+
 static struct stfsm_seq stfsm_seq_read;		/* Dynamically populated */
 static struct stfsm_seq stfsm_seq_write;	/* Dynamically populated */
 static struct stfsm_seq stfsm_seq_en_32bit_addr;/* Dynamically populated */
@@ -1433,6 +1443,35 @@ static int stfsm_s25fl_config(struct stfsm *fsm)
 	return 0;
 }
 
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+	uint32_t data_pads;
+	uint16_t sta_wr;
+	uint8_t sta1, sta2;
+	int ret;
+
+	ret = stfsm_prepare_rwe_seqs_default(fsm);
+	if (ret)
+		return ret;
+
+	/* If using QUAD mode, set QE STATUS bit */
+	data_pads = ((stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta1);
+		stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sta2);
+
+		sta_wr = ((uint16_t)sta2 << 8) | sta1;
+
+		sta_wr |= W25Q_STATUS_QE;
+
+		stfsm_write_status(fsm, sta_wr, 2);
+
+		stfsm_wait_busy(fsm);
+	}
+
+	return 0;
+}
+
 static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
 		      uint32_t offset)
 {
-- 
1.8.3.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help