I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
The iMX6Q cpufreq driver won't show up in menu config / gconfig and
that's the reason why I added it.

Regards,

john

On Sun, Jan 12, 2014 at 7:20 PM, Shawn Guo [off-list ref] wrote:

On Thu, Jan 09, 2014 at 06:39:51PM -0800, John Tobias wrote:

quoted

Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that
the user can enable the cpufreq support for iMX6Q and/or iMX6SL.

All I was asking is to move the following:

        select ARCH_HAS_CPUFREQ
        select ARCH_HAS_OPP
        select PM_OPP if PM

So leave HAVE_IMX_ANATOP out there, and only move the above ones please.

Shawn

quoted

Signed-off-by: John Tobias <redacted>
---
 arch/arm/mach-imx/Kconfig | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7a6e6f7..d6aa34d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig

@@ -1,5 +1,6 @@
 config ARCH_MXC
      bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+     select ARCH_HAS_CPUFREQ
      select ARCH_REQUIRE_GPIOLIB
      select ARM_CPU_SUSPEND if PM
      select ARM_PATCH_PHYS_VIRT

@@ -9,8 +10,10 @@ config ARCH_MXC
      select GENERIC_ALLOCATOR
      select GENERIC_CLOCKEVENTS
      select GENERIC_IRQ_CHIP
+     select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL
      select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
      select MULTI_IRQ_HANDLER
+     select PM_OPP if PM
      select SOC_BUS
      select SPARSE_IRQ
      select USE_OF

@@ -779,16 +782,14 @@ config  SOC_IMX53

 config SOC_IMX6Q
      bool "i.MX6 Quad/DualLite support"
-     select ARCH_HAS_CPUFREQ
-     select ARCH_HAS_OPP
+     select ARCH_HAS_OPP
      select ARM_ERRATA_754322
      select ARM_ERRATA_764369 if SMP
      select ARM_ERRATA_775420
      select ARM_GIC
      select CPU_V7
      select HAVE_ARM_SCU if SMP
-     select HAVE_ARM_TWD if SMP
-     select HAVE_IMX_ANATOP
+     select HAVE_ARM_TWD if SMP
      select HAVE_IMX_GPC
      select HAVE_IMX_MMDC
      select HAVE_IMX_SRC

@@ -800,8 +801,7 @@ config SOC_IMX6Q
      select PINCTRL_IMX6Q
      select PL310_ERRATA_588369 if CACHE_PL310
      select PL310_ERRATA_727915 if CACHE_PL310
-     select PL310_ERRATA_769419 if CACHE_PL310
-     select PM_OPP if PM
+     select PL310_ERRATA_769419 if CACHE_PL310

      help
        This enables support for Freescale i.MX6 Quad processor.

@@ -812,7 +812,6 @@ config SOC_IMX6SL
      select ARM_ERRATA_775420
      select ARM_GIC
      select CPU_V7
-     select HAVE_IMX_ANATOP
      select HAVE_IMX_GPC
      select HAVE_IMX_MMDC
      select HAVE_IMX_SRC
--

1.8.3.2