[PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove

On Wed, Dec 04, 2013 at 03:17:18PM +0100, Andrew Lunn wrote:

The Marvell Dove SoC can run the CPU at two frequencies. The high
frequencey is from a PLL, while the lower is the same as the DDR
clock. Add a cpufreq driver to swap between these frequences.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Sort header files
Remove unneeded header files
Notify only on change
Use get_cpu_device(0), devm_clk_get()
Use platform_get_resource_byname()
Error check clk_prepare_enable()
Comment the interrupt handler

rebase onto 3.13-rc2 linux-next

Is there something you need that prevents you from basing on v3.13-rc1?

use target_index
---
 drivers/cpufreq/Kconfig.arm    |   5 +
 drivers/cpufreq/Makefile       |   1 +
 drivers/cpufreq/dove-cpufreq.c | 259 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 265 insertions(+)
 create mode 100644 drivers/cpufreq/dove-cpufreq.c

Other than that,

Acked-by: Jason Cooper <redacted>

thx,

Jason.