[PATCH v7 0/2] Add PCIe support for i.MX6q

On Thu, Oct 10, 2013 at 7:18 PM, Marek Vasut [off-list ref] wrote:

And so does the probe log (but the pcieport failure still persists):

pci_bus 0000:04: bus scan returning with max=04
pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
pci_bus 0000:02: bus scan returning with max=04
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 04
pci_bus 0000:01: bus scan returning with max=04
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
pci_bus 0000:00: bus scan returning with max=04
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
PCI: Device 0000:00:00.0 not available because of resource collisions
pcieport: probe of 0000:00:00.0 failed with error -22

load pcieport driver too early.

PCI: Device 0000:00:00.0 not available because of resource collisions
pci 0000:00:00.0: Error enabling bridge (-22), continuing
PCI: enabling device 0000:01:00.0 (0140 -> 0143)
pcieport 0000:01:00.0: enabling bus mastering
PCI: Device 0000:00:00.0 not available because of resource collisions
pci 0000:00:00.0: Error enabling bridge (-22), continuing
PCI: Device 0000:00:00.0 not available because of resource collisions
pci 0000:00:00.0: Error enabling bridge (-22), continuing
pci 0000:03:00.0: calling quirk_e100_interrupt+0x0/0x20c
pci 0000:00:00.0: fixup irq: got 155
pci 0000:00:00.0: assigning IRQ 155
pcieport 0000:01:00.0: fixup irq: got 0
pcieport 0000:01:00.0: assigning IRQ 00
pcieport 0000:02:01.0: fixup irq: got 0
pcieport 0000:02:01.0: assigning IRQ 00
pcieport 0000:02:02.0: fixup irq: got 0
pcieport 0000:02:02.0: assigning IRQ 00
pci 0000:03:00.0: fixup irq: got 155
pci 0000:03:00.0: assigning IRQ 155
pci 0000:00:00.0: BAR 8: assigned [mem 0x01000000-0x01bfffff]
pci 0000:00:00.0: BAR 0: assigned [mem 0x01c00000-0x01cfffff]
pci 0000:00:00.0: BAR 0: set to [mem 0x01c00000-0x01cfffff] (PCI address
[0x1c00000-0x1c
fffff])
pci 0000:00:00.0: BAR 6: assigned [mem 0x01d00000-0x01d0ffff pref]
pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
pcieport 0000:01:00.0: BAR 8: assigned [mem 0x01000000-0x01bfffff]
pcieport 0000:01:00.0: BAR 7: assigned [io  0x1000-0x1fff]
pcieport 0000:02:01.0: BAR 8: assigned [mem 0x01000000-0x01bfffff]
pcieport 0000:02:01.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:03:00.0: BAR 0: assigned [mem 0x01000000-0x017fffff]
pci 0000:03:00.0: BAR 0: set to [mem 0x01000000-0x017fffff] (PCI address
[0x1000000-0x17
fffff])
pci 0000:03:00.0: BAR 3: assigned [mem 0x01800000-0x01803fff]
pci 0000:03:00.0: BAR 3: set to [mem 0x01800000-0x01803fff] (PCI address
[0x1800000-0x18
03fff])
pci 0000:03:00.0: BAR 2: assigned [io  0x1000-0x101f]
pci 0000:03:00.0: BAR 2: set to [io  0x1000-0x101f] (PCI address
[0x1000-0x101f])
pci 0000:00:00.0: PCI bridge to [bus 01-04]
pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:00.0:   bridge window [mem 0x01000000-0x01bfffff]
pci 0000:00:00.0: PCI bridge to [bus 01-04]
pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:00.0:   bridge window [mem 0x01000000-0x01bfffff]
pci_bus 0000:00: resource 4 [io  0x1000-0x10000]
pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x01000000-0x01bfffff]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x01000000-0x01bfffff]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x01000000-0x01bfffff]

Looks your arch call pci_assign_unassigned_resources() too late.

you should have call it with fs_initcall()...

please try to boot with "debug ignore_loglevel initcall_debug" to sort out
the initcall sequence.

Yinghai