[RESEND PATCH 3/4] ARM: dts: bcm281xx: Add i2c busses

On Wed, Oct 16, 2013 at 09:32:51PM -0700, Christian Daudt wrote:

Hi Tim,
 This patch does not work as it relies on the yet-unmerged clock code
for bcm11351. This patch does not apply to -rc, and when tweaked it
does not compile as it references  non-existent bsc_clks.
 Has the clk patches been submitted yet ? Applying this will have to
wait until those have been accepted.

Hi Christian, Tim mentioned the dependencies in the cover letter.
Sebastian's series, for which the pull request is already sent, and then
Tim's own fixed clock series that is pending some review.

-Matt

On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger [off-list ref] wrote:

quoted

Add the DTS nodes for all the i2c busses in the SoC.

Signed-off-by: Tim Kryger <redacted>
Reviewed-by: Christian Daudt <redacted>
Reviewed-by: Matt Porter <redacted>
Reviewed-by: Markus Mayer <redacted>
---
 arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 1246885..4bfd7e3 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi

@@ -146,6 +146,46 @@
                status = "disabled";
        };

+       i2c at 3e016000 {
+               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+               reg = <0x3e016000 0x80>;
+               interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clocks = <&bsc1_clk>;
+               status = "disabled";
+       };
+
+       i2c at 3e017000 {
+               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+               reg = <0x3e017000 0x80>;
+               interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clocks = <&bsc2_clk>;
+               status = "disabled";
+       };
+
+       i2c at 3e018000 {
+               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+               reg = <0x3e018000 0x80>;
+               interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clocks = <&bsc3_clk>;
+               status = "disabled";
+       };
+
+       i2c at 3500d000 {
+               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+               reg = <0x3500d000 0x80>;
+               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clocks = <&pmu_bsc_clk>;
+               status = "disabled";
+       };
+
        clocks {
                bsc1_clk: bsc1 {
                        compatible = "fixed-clock";
--

1.8.0.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel