Hi Tim,
This patch does not work as it relies on the yet-unmerged clock code
for bcm11351. This patch does not apply to -rc, and when tweaked it
does not compile as it references non-existent bsc_clks.
Has the clk patches been submitted yet ? Applying this will have to
wait until those have been accepted.
thanks,
csd
On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Add the DTS nodes for all the i2c busses in the SoC.
Signed-off-by: Tim Kryger <redacted>
Reviewed-by: Christian Daudt <redacted>
Reviewed-by: Matt Porter <redacted>
Reviewed-by: Markus Mayer <redacted>
---
arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 1246885..4bfd7e3 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -146,6 +146,46 @@
status = "disabled";
};
+ i2c at 3e016000 {
+ compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+ reg = <0x3e016000 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bsc1_clk>;
+ status = "disabled";
+ };
+
+ i2c at 3e017000 {
+ compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+ reg = <0x3e017000 0x80>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bsc2_clk>;
+ status = "disabled";
+ };
+
+ i2c at 3e018000 {
+ compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+ reg = <0x3e018000 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bsc3_clk>;
+ status = "disabled";
+ };
+
+ i2c at 3500d000 {
+ compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+ reg = <0x3500d000 0x80>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmu_bsc_clk>;
+ status = "disabled";
+ };
+
clocks {
bsc1_clk: bsc1 {
compatible = "fixed-clock";
--1.8.0.1