[PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller

On 09/24/2013 05:59 PM, Wolfram Sang wrote:

quoted

"glitch" is is used to tune the I2C timing requirements, and has a
nanosecond granularity.
These values are added to default timing values.
I'm not 100% sure, but it looks like the "samsung,i2c-sda-delay" in the
i2c-s3c2410 driver.

For that, we have the generic "i2c-sda-hold-time-ns" property. The s3c
driver hasn't been converted to use it, sadly.

Ok, thank you for pointing this out.
After some checks, this property doesn't match with what is done in this 
driver.

In the v2 series I am sending, I removed the I2C timing tuning as it 
works on all
the boards I have tested with.
I will only keep the anti-glitch filtering, using private properties as 
I didn't find any generic
ones that could fit.

Regards,
Maxime