On Tue, Aug 06, 2013 at 10:43:42PM +0200, Gerhard Sittig wrote:

cleanup the clock API use of the UART driver which is shared among the
MPC512x and the MPC5200 platforms
- get, prepare, and enable the MCLK during port allocation; disable,
  unprepare and put the MCLK upon port release; hold a reference to the
  clock over the period of use; check for and propagate enable errors
- fix a buffer overflow for clock names with two digit PSC index numbers
- stick with the PPC_CLOCK 'psc%d_mclk' name for clock lookup, only
  switch to a fixed string later after device tree based clock lookup
  will have become available

to achieve support for MPC512x which is neutral to MPC5200, the
modification was done as follows
- introduce "clock alloc" and "clock release" routines in addition to
  the previous "clock enable/disable" routine in the psc_ops struct
- make the clock allocation a part of the port request (resource
  allocation), and make clock release a part of the port release, such
  that essential resources get allocated early
- just enable/disable the clock from within the .clock() callback
  without any allocation or preparation as the former implementation
  did, since this routine is called from within the startup and shutdown
  callbacks
- all of the above remains a NOP for the MPC5200 platform (no callbacks
  are provided on that platform)
- implementation note: the clock gets enabled upon allocation already
  just in case the clock is not only required for bitrate generation but
  for register access as well

Signed-off-by: Gerhard Sittig <redacted>

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>