[PATCH v4 09/31] powerpc/fsl-pci: improve clock API use
From: Gerhard Sittig <hidden>
Date: 2013-08-06 20:43:49
Also in:
linuxppc-dev
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Michael Ellerman, Linus Torvalds
make the Freescale PCI driver get, prepare and enable the PCI clock during probe(); the clock gets put upon device close by the devm approach clock lookup is non-fatal as not all platforms may provide clock specs in their device tree, but failure to enable specified clocks are fatal the driver appears to not have a remove() routine, so no reference to the clock is kept during use, and the clock isn't released (the devm approach will put the clock, but it won't get disabled or unprepared) Signed-off-by: Gerhard Sittig <redacted> --- arch/powerpc/sysdev/fsl_pci.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 46ac1dd..549ff08 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c@@ -17,6 +17,8 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ + +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/delay.h>
@@ -926,12 +928,32 @@ void fsl_pci_assign_primary(void) static int fsl_pci_probe(struct platform_device *pdev) { + struct clk *clk; int ret; struct device_node *node; #ifdef CONFIG_SWIOTLB struct pci_controller *hose; #endif + /* + * clock lookup is non-fatal since the driver is shared among + * platforms and not all of them provide clocks specs in their + * device tree, but failure to enable a specified clock is + * considered fatal + */ + clk = devm_clk_get(&pdev->dev, "per"); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "Could not enable peripheral clock\n"); + return ret; + } + /* + * TODO where to store the 'clk' reference? there appears + * to be no remove() routine which undoes what probe() does + */ + } + node = pdev->dev.of_node; ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
--
1.7.10.4