[PATCH] ARM: at91/dt: split sam9x5 peripheral definitions

Dear Boris BREZILLON,

On Wed,  7 Aug 2013 12:14:26 +0200, Boris BREZILLON wrote:

This patch splits the sam9x5 peripheral definitions into:
- a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
- several optional peripheral definitions which will be included by specific
  sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)

This provides a better representation of the real hardware (drop unneeded
dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
peripheral id 25).

Signed-off-by: Boris BREZILLON <redacted>
---
 arch/arm/boot/dts/at91sam9g25.dtsi       |    2 +
 arch/arm/boot/dts/at91sam9g35.dtsi       |    1 +
 arch/arm/boot/dts/at91sam9x25.dtsi       |   24 ++---------
 arch/arm/boot/dts/at91sam9x35.dtsi       |    1 +
 arch/arm/boot/dts/at91sam9x5.dtsi        |   67 ------------------------------
 arch/arm/boot/dts/at91sam9x5_macb0.dtsi  |   56 +++++++++++++++++++++++++
 arch/arm/boot/dts/at91sam9x5_macb1.dtsi  |   44 ++++++++++++++++++++
 arch/arm/boot/dts/at91sam9x5_usart3.dtsi |   51 +++++++++++++++++++++++
 8 files changed, 158 insertions(+), 88 deletions(-)
 create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
 create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
 create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi

Hum, do we really want to have .dtsi files per peripheral? I might have
overlooked this, but I think it's the first time we would have this in
arch/arm/boot/dts.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com