[PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes
flat view
From: Simon Baatz <hidden>
Date: 2013-05-20 21:27:14
Also in:
linux-devicetree, lkml, netdev
Hi Sebastian, On Mon, May 06, 2013 at 05:33:39PM +0200, Sebastian Hesselbarth wrote:
This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled Kirkwood boards. Phy nodes are also added with reg property set on a per-board basis.
...
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index fada7e6..c01a273 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi@@ -202,5 +202,57 @@ clocks = <&gate_clk 4>; status = "disabled"; }; + + mdio: mdio-bus at 72004 { + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x84>; + interrupts = <11>;
Shouldn't this be 46? - Simon