[PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283
From: rui.zhang@intel.com (Zhang Rui)
Date: 2013-02-04 03:14:53
Also in:
linux-pm
On Sat, 2013-02-02 at 15:35 +0100, Andrew Lunn wrote:
From: Nobuhiro Iwamatsu <redacted> Kirkwood 88F6282 and 88F6283 have a thermal sensor. This patch adds a DT node and enables the driver in the kernel config. Signed-off-by: Nobuhiro Iwamatsu <redacted> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
I can take this one but I need ACK from ARM experts first. thanks, rui
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/kirkwood-6282.dtsi | 6 ++++++ arch/arm/configs/kirkwood_defconfig | 2 ++ 2 files changed, 8 insertions(+)diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 4ccea21..bd168b6 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi@@ -32,6 +32,12 @@ }; }; + thermal at 10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + i2c at 11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>;diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 93f3794..3d8667f 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig@@ -118,6 +118,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y