[PATCH v3 4/4] Dove: Thermal: Add DT node and enable in defconfig
From: andrew@lunn.ch (Andrew Lunn)
Date: 2013-02-02 14:35:49
Also in:
linux-pm
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
Add a device tree node to instantiate the dove thermal driver. Enable the driver and the thermal framework in dove_defconfig. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/dove.dtsi | 5 +++++ arch/arm/configs/dove_defconfig | 2 ++ 2 files changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 42eac1f..3584a00 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi@@ -50,6 +50,11 @@ #clock-cells = <1>; }; + thermal: thermal at d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + uart0: serial at 12000 { compatible = "ns16550a"; reg = <0x12000 0x100>;
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 0b7ee92..9713b5b 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig@@ -80,6 +80,8 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_DOVE_THERMAL=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y
--
1.7.10.4