[PATCH 08/14] ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
From: Jon Hunter <hidden>
Date: 2013-02-26 17:30:35
Also in:
linux-devicetree, linux-omap
Subsystem:
arm port, omap usb support, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Convert the OMAP2+ TUSB code to use the gpmc_cs_program_settings() function for configuring the various GPMC options instead of directly programming the CONFIG1 register. Signed-off-by: Jon Hunter <redacted> --- arch/arm/mach-omap2/usb-tusb6010.c | 43 ++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 940410a..f38efd0 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c@@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/string.h> #include <linux/types.h> #include <linux/errno.h>
@@ -28,12 +29,21 @@ static unsigned refclk_psec; static struct gpmc_settings tusb_async = { .mux_add_data = true, + .wait_on_read = true, + .wait_on_write = true, + .device_width = GPMC_DEVWIDTH_16BIT, }; static struct gpmc_settings tusb_sync = { + .burst_read = true, + .burst_write = true, .mux_add_data = true, .sync_read = true, .sync_write = true, + .wait_on_read = true, + .wait_on_write = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, }; /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
@@ -168,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + tusb_async.wait_pin = waitpin; async_cs = async; - gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, - GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_READTYPE_ASYNC - | GPMC_CONFIG1_WRITETYPE_ASYNC - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA); + status = gpmc_cs_program_settings(async_cs, &tusb_async); + if (IS_ERR_VALUE(status)) + return status; /* SYNC region, primarily for DMA */ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
@@ -189,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + tusb_sync.wait_pin = waitpin; sync_cs = sync; - gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, - GPMC_CONFIG1_READMULTIPLE_SUPP - | GPMC_CONFIG1_READTYPE_SYNC - | GPMC_CONFIG1_WRITEMULTIPLE_SUPP - | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA - /* fclk divider gets set later */ - ); + + status = gpmc_cs_program_settings(sync_cs, &tusb_sync); + if (IS_ERR_VALUE(status)) + return status; /* IRQ */ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
--
1.7.10.4