[v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards
From: Yang, Wenyou <hidden>
Date: 2013-02-08 01:51:24
Also in:
lkml
Hello, JC
-----Original Message----- From: Yang, Wenyou Sent: 2013?2?6? 9:35 To: 'Jean-Christophe PLAGNIOL-VILLARD' Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Ferre, Nicolas; richard.genoud at gmail.com; Lin, JM; linux at arm.linux.org.uk Subject: RE: [v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boardsquoted
-----Original Message----- From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com] Sent: 2013?2?6? 3:50 To: Yang, Wenyou Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;Ferre,quoted
Nicolas; richard.genoud at gmail.com; Lin, JM; linux at arm.linux.org.uk Subject: Re: [v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards On 15:34 Mon 14 Jan , Wenyou Yang wrote:quoted
From: Richard Genoud <redacted> Signed-off-by: Richard Genoud <redacted> [wenyou.yang at atmel.com: added spi nodes for the sam9263ek,sam9g20ek,quoted
sam9m10g45ek and sam9n12ek boards]quoted
Signed-off-by: Wenyou Yang <redacted> Cc: linux at arm.linux.org.uk --- arch/arm/boot/dts/at91sam9263ek.dts | 14++++++++++++++quoted
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 14++++++++++++++quoted
arch/arm/boot/dts/at91sam9m10g45ek.dts | 14++++++++++++++quoted
arch/arm/boot/dts/at91sam9n12ek.dts | 14++++++++++++++quoted
arch/arm/boot/dts/at91sam9x5ek.dtsi | 14++++++++++++++quoted
quoted
5 files changed, 70 insertions(+)diff --git a/arch/arm/boot/dts/at91sam9263ek.dtsb/arch/arm/boot/dts/at91sam9263ek.dtsquoted
index 1eb0872..63ba57b 100644--- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts@@ -79,6 +79,20 @@ }; }; }; + + spi0: spi at fffa4000 { + status = "okay"; + cs-gpios = <&pioA 5 0 + &pioA 3 0 + &pioA 4 0 + &pioB 11 0NACK we no use that much as cs-gpios on this hwThanks for your feedback. Listing the all choices for cs-gpios, one cs-gpio is selected by reg value. Maybe listing one cs-gpio is OK. I will try it. I am going to dig the feasibility of removing cs-gpios.
I need remain the list of cs-gpios, because "master->num_chipselect" is got from the number of item of this list. If this list is removed, only the cs-gpio for used chip-select is provided , it works for CS0 chip-select, but it fails to work for other than CS0, e.g. CS1. Could you give me some idea? Thank you in advance.
quoted
quoted
+ >; + mtd_dataflash at 0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand at 40000000 {diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsib/arch/arm/boot/dts/at91sam9g20ek_common.dtsiquoted
index da15e83..49ad49e 100644--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi@@ -96,6 +96,20 @@ status = "okay"; pinctrl-0 = <&pinctrl_ssc0_tx>; }; + + spi0: spi at fffc8000 { + status = "okay"; + cs-gpios = <&pioA 3 0 + &pioC 11 0 + &pioC 16 0 + &pioC 17 0ditto and so on you must only provife the gpio use by the hwquoted
+ >; + mtd_dataflash at 0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; }; nand0: nand at 40000000 {diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dtsb/arch/arm/boot/dts/at91sam9m10g45ek.dtsquoted
index 20c3191..275f22d 100644--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts@@ -102,6 +102,20 @@ }; }; }; + + spi0: spi at fffa4000{ + status = "okay"; + cs-gpios = <&pioB 3 0 + &pioB 18 0 + &pioB 19 0 + &pioD 27 0 + >; + mtd_dataflash at 0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <13000000>; + reg = <0>; + }; + }; }; nand0: nand at 40000000 {diff --git a/arch/arm/boot/dts/at91sam9n12ek.dtsb/arch/arm/boot/dts/at91sam9n12ek.dtsquoted
index 0376bf4..4eeca7b 100644--- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts@@ -67,6 +67,20 @@ }; }; }; + + spi0: spi at f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0 + &pioA 7 0 + &pioA 1 0 + &pioB 3 0 + >; + m25p80 at 0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand at 40000000 {diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsib/arch/arm/boot/dts/at91sam9x5ek.dtsiquoted
index 8a7cf1d..ca0a056 100644--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi@@ -84,6 +84,20 @@ }; }; }; + + spi0: spi at f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0 + &pioA 7 0 + &pioA 1 0 + &pioB 3 0 + >; + m25p80 at 0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; usb0: ohci at 00600000 { --1.7.9.5Best Regards, Wenyou Yang
Best Regards, Wenyou Yang