[PATCH] ARM: OMAP2+: clockdomain: disabling unused clks

On Thu, 8 Nov 2012, Mike Turquette wrote:

The OMAP port to the common clk framework[1] resulted in spurious WARNs
while disable unused clocks.  This is due to _clkdm_clk_hwmod_disable
catching clkdm->usecount's with a value of zero.  Even less desirable it
would not allow the clkdm_clk_disable function pointer to get called due
to an early return of -ERANGE.

This patch adds a check for such a corner case by skipping the WARN and
early return in the event that clkdm->usecount and clk->enable_usecount
are both zero.  Presumably this could only happen during the check for
unused clocks at boot-time.

[1] http://article.gmane.org/gmane.linux.ports.arm.omap/88824

Signed-off-by: Mike Turquette <redacted>

I don't think this is going to work, as it currently stands.  The code 
will just bypass the warning and the error return.  The clockdomain 
usecount still will be decremented, which is going to cause problems since 
the usecount will be inaccurate.


- Paul