Thread (14 messages) 14 messages, 4 authors, 2012-11-14

[PATCH v2 2/5] clk: Add support for fundamental zynq clks

From: Michal Simek <hidden>
Date: 2012-11-14 15:13:06
Also in: lkml

-----Original Message-----
From: Josh Cartwright [mailto:josh.cartwright at ni.com]
Sent: Tuesday, November 13, 2012 11:03 PM
To: Soren Brinkmann; Michal Simek
Cc: Mike Turquette; Rob Herring; linux-kernel at vger.kernel.org; linux-arm-
kernel at lists.infradead.org; John Linn; arm at kernel.org
Subject: Re: [PATCH v2 2/5] clk: Add support for fundamental zynq clks

On Thu, Nov 08, 2012 at 03:28:07PM -0800, Soren Brinkmann wrote:
quoted
One note below:

On Wed, Oct 31, 2012 at 12:58:52PM -0600, Josh Cartwright wrote:
[..]
quoted
quoted
--- /dev/null
+++ b/drivers/clk/clk-zynq.c
[..]
quoted
quoted
+struct zynq_periph_clk {
+ struct clk_hw           hw;
+ struct clk_onecell_data onecell_data;
+ struct clk              *gates[2];
+ void __iomem            *clk_ctrl;
+ spinlock_t              clkact_lock;
+};
+
+#define to_zynq_periph_clk(hw)   container_of(hw, struct zynq_periph_clk,
hw)
quoted
quoted
+
+static const u8 periph_clk_parent_map[] = {
+ 0, 0, 1, 2
+};
+#define PERIPH_CLK_CTRL_SRC(x)   (periph_clk_parent_map[((x) & 3) >> 4])
I think this should be:
#define PERIPH_CLK_CTRL_SRC(x)      (periph_clk_parent_map[((x) & 0x30) >>
4])

Yes indeed it should be, thanks.

Michal-  I'll just be following up with a v3 of this patch instead of spinning up the
whole set to save myself some time.  If you'd rather I spin up the whole set, let
me know.

No problem with that.

thanks,
Michal


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help