@@ -959,6 +959,7 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	select ARM_AMBA
 	select ARM_GIC
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select ICST

@@ -53,5 +53,61 @@
 			interrupts = <0 50 4>;
 			clock = <50000000>;
 		};
+
+		slcr: slcr at f8000000 {
+			compatible = "xlnx,zynq-slcr";
+			reg = <0xF8000000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ps_clk: ps_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					/* clock-frequency set in board-specific file */
+					clock-output-names = "ps_clk";
+				};
+				armpll: armpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x100 0x110>;
+					clock-output-names = "armpll";
+				};
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x104 0x114>;
+					clock-output-names = "ddrpll";
+				};
+				iopll: iopll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x108 0x118>;
+					clock-output-names = "iopll";
+				};
+				uart_clk: uart_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-periph-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x154>;
+					clock-output-names = "uart0_ref_clk",
+							     "uart1_ref_clk";
+				};
+				cpu_clk: cpu_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-cpu-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x120 0x1C4>;
+					clock-output-names = "cpu_6x4x",
+							     "cpu_3x2x",
+							     "cpu_2x",
+							     "cpu_1x";
+				};
+			};
+		};
 	};
 };

@@ -28,3 +28,7 @@
 	};
 
 };
+
+&ps_clk {
+	clock-frequency = <33333330>;
+};

@@ -19,6 +19,8 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/clk/zynq.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>

@@ -96,6 +98,15 @@ static struct map_desc io_desc[] __initdata = {
 
 static void __init xilinx_zynq_timer_init(void)
 {
+	struct device_node *np;
+	void __iomem *slcr;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
+	slcr = of_iomap(np, 0);
+	WARN_ON(!slcr);
+
+	xilinx_zynq_clocks_init(slcr);
+
 	xttcpss_timer_init();
 }
 

@@ -19,6 +19,7 @@ endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
+obj-$(CONFIG_ARCH_ZYNQ)		+= clk-zynq.o
 
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o