[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion
From: Kevin Hilman <hidden>
Date: 2012-10-10 18:29:03
Also in:
linux-omap, linux-serial
Possibly related (same subject, not in this thread)
- 2012-10-09 · [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Sourav <hidden>
- 2012-10-06 · [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Alan Cox <hidden>
- 2012-10-06 · [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden>
- 2012-10-06 · [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden>
- 2012-10-06 · [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden>
Hi Sourav, Sourav [off-list ref] writes: [...]
Boot Tested this patch series against v3.6 tag(applied cleanly) on panda board and PM tested(hitting off in Idle and suspend) on omap3630 based beagle board. Note, I also tested the patches against the current master but only after rebasing, since the current master includes serial patches from Felipe Balbi[1]. [1] https://lkml.org/lkml/2012/8/24/139 Tested-by: Sourav Poddar <redacted>
Did you test flow control after off-mode transitons? Russell indicated that the context save/restore is not saving important bits related to HW flow control, so I suspect some more testing, specifically of flow control after off-mode is needed. Kevin