[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden> · 2012-10-06
[RFC 01/24] SERIAL: omap: fix set_mctrl() breakage · Russell King <hidden> · 2012-10-06
[RFC 02/24] SERIAL: omap: fix bit masks for software flow control · Russell King <hidden> · 2012-10-06
[RFC 03/24] SERIAL: omap: remove setting of EFR SCD bit · Russell King <hidden> · 2012-10-06
[RFC 04/24] SERIAL: omap: fix MCR TCRTLR bit handling · Russell King <hidden> · 2012-10-06
[RFC 05/24] SERIAL: omap: no need to re-read EFR · Russell King <hidden> · 2012-10-06
[RFC 06/24] SERIAL: omap: allow hardware assisted rts/cts modes to be disabled · Russell King <hidden> · 2012-10-06
[RFC 07/24] SERIAL: omap: allow hardware assisted IXANY mode to be disabled · Russell King <hidden> · 2012-10-06
[RFC 08/24] SERIAL: core: use local variable uport in uart_set_termios() · Russell King <hidden> · 2012-10-06
[RFC 09/24] SERIAL: core: add hardware assisted s/w flow control support · Russell King <hidden> · 2012-10-06
[RFC 10/24] SERIAL: core: add hardware assisted h/w flow control support · Russell King <hidden> · 2012-10-06
[RFC 11/24] SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control · Russell King <hidden> · 2012-10-06
[RFC 12/24] SERIAL: omap: fix hardware assisted flow control · Russell King <hidden> · 2012-10-06
[RFC 13/24] SERIAL: omap: configure xon/xoff before setting modem control lines · Russell King <hidden> · 2012-10-06
[RFC 14/24] SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios · Russell King <hidden> · 2012-10-06
[RFC 15/24] SERIAL: omap: don't read back LCR/MCR/EFR · Russell King <hidden> · 2012-10-06
[RFC 16/24] SERIAL: omap: simplify · Russell King <hidden> · 2012-10-06
[RFC 17/24] SERIAL: omap: always set TCR · Russell King <hidden> · 2012-10-06
[RFC 18/24] SERIAL: omap: move xon/xoff setting earlier · Russell King <hidden> · 2012-10-06
[RFC 19/24] SERIAL: omap: simplify (2) · Russell King <hidden> · 2012-10-06
[RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks · Russell King <hidden> · 2012-10-06
[RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks · Alan Cox <hidden> · 2012-10-06
[RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks · Russell King - ARM Linux <hidden> · 2012-10-06
[RFC 21/24] SERIAL: omap: use tx buffer allocation API · Russell King <hidden> · 2012-10-06
[RFC 22/24] SERIAL: omap: typesafe conversion from uart_port to uart_omap_port · Russell King <hidden> · 2012-10-06
[RFC 23/24] SERIAL: omap: move driver private definitions and structures to driver · Russell King <hidden> · 2012-10-06
[RFC 24/24] SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR · Russell King <hidden> · 2012-10-06
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden> · 2012-10-06
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden> · 2012-10-06
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Russell King - ARM Linux <hidden> · 2012-10-06
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Alan Cox <hidden> · 2012-10-06
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion · Sourav <hidden> · 2012-10-09

[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion

From: Alan Cox <hidden>
Date: 2012-10-06 15:50:44
Also in: linux-omap, linux-serial

On Sat, 6 Oct 2012 13:38:03 +0100
Russell King - ARM Linux [off-list ref] wrote:

Hi,

This series of patches fixes multiple flow control issues with the OMAP
serial driver, and prepares the driver for DMA engine conversion.  We
require hardware assisted flow control to work properly for DMA support
otherwise we have no way to properly pause the transmitter.

All the generic parts

Acked-by: Alan Cox <redacted>

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help