[PATCH v2 2/4] zynq: move static peripheral mappings

On 2012-10-23 18:42 -0500, Josh Cartwright wrote:

On Tue, Oct 23, 2012 at 04:27:03PM -0400, Nick Bowler wrote:

quoted

Just FYI, I sent a patch to fix the same bug a while back

  https://patchwork.kernel.org/patch/1156361/

together with other patches to fix early printk on the ZC702 serial
console.  Admittedly, I dropped the ball on these as other issues
came up so I was away from the Zynq for a while.

However, I'm now getting back on the Zynq and have a bunch of patches to
make it all work on the ZC702 board.  I've respun the ZC702 early boot
fixes against newer git but they're obviously going to conflict with
this series.  Should I resend them anyway?

If you have other fixes for the zc702, that'd be great.  Most of my
testing has been in a qemu model; I haven't had a chance to try getting
the zc702 booting yet.

The first stumbling block is that it looks like the secondary uart is
the primary uart on the zc702.

Yes, that is indeed the case, and was what I tried to address with my
earlier patches.

quoted

I also have a DT binding for the TTC driver, I can send that.

That'd be great!

OK, I will respin and test this stuff on top of your v4 series and send
them out.

Cheers,
-- 
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)