Hi Tony,

On Mon, Sep 03, 2012 at 11:04:10, Mohammed, Afzal wrote:

On Mon, Aug 27, 2012 at 14:04:44, Mohammed, Afzal wrote:

quoted

On Sat, Aug 25, 2012 at 01:16:30, Tony Lindgren wrote:

quoted

quoted

This hangs n800 during the boot.

Paul reported that n800 stopped booting on OMAP baseline [1]
due to an mmc issue and has posted a solution [2].

Are you facing the same issue ?, if so, then it is not
due to this series.

I tried to get an n800, but has been unsuccessful.

Regards
Afzal

[1] http://marc.info/?l=linux-omap&m=134685988517580&w=2
[2] http://www.spinics.net/lists/arm-kernel/msg190879.html

quoted

Shall I read the above as n800 boot without patch 10/10,
but with the other patches in this series ?

As per the board file, n800 has tusb6010 as well as
OneNAND in sync read & async write mode, was OneNAND
working without 10/10.

Do you have any idea, which timing could have gone wrong,
can you please sent me DEBUG enabled gpmc log with and
without 10/10.

Can you please sent me GPMC DEBUG enabled logs with and
without this series.