Hi Shawn,

On Mon, Sep 17, 2012 at 01:34:29PM +0800, Shawn Guo wrote:

The series enables multi-platform support for imx.  Since the required
frameworks (clk, pwm) and spare_irq have already been adopted on imx,
the series is all about cleaning up mach/* headers.  Along with the
changes, arch/arm/plat-mxc gets merged into arch/arm/mach-imx.

It's based on a bunch of branches (works from others), Rob's initial
multi-platform series, Arnd's platform-data and smp_ops (Marc's) and
imx 3.7 material (Sascha and myself).

It's available on branch below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform

It's been tested on imx5 and imx6, and only compile-tested on imx2 and
imx3, so testing on imx2/3 are appreciated.

Subsystem maintainers,

I plan to send the whole series via arm-soc tree at the end of 3.7
merge window when all dependant bits hit mainline.  Please have a
look at the patches you get copied and provide ACKs if the changes
are good.  Thanks.

I just had a look at the remaining initcalls in arch-imx. Most of them
are protected with a cpu_is_*, but this one should be fixed before i.MX
is enabled for multi platform:

arch/arm/mach-imx/devices/devices.c:48:core_initcall(mxc_device_init);

I think this won't harm others directly, but it will register i.MX
related devices on foreign platforms.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |