[PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot

On Mon, Aug 06, 2012 at 01:51:07PM -0300, Otavio Salvador wrote:

On Mon, Aug 6, 2012 at 12:42 PM, Shawn Guo [off-list ref] wrote:

quoted

For non-DT boot, function tx28_add_fec0 configures all ENET0 pins
into gpio mode for resetting fec phy, and then reconfigures those pins
into ENET function after that.

For DT boot, all the pin configuration is done by pinctrl subsystem.
Ideally, when gpio_requst gets called, GPIO subsystem should call

                        ^ typo

Fixed.  Thanks, Otavio.

-- 
Regards,
Shawn