[PATCH v2 2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA

On 03.08.2012 12:07, Sascha Hauer wrote:

On Wed, Jul 25, 2012 at 08:18:19AM -0300, Fabio Estevam wrote:

quoted

From: Fabio Estevam<redacted>

MTD_NAND_GPMI_NAND driver depends on MXS_DMA to be selected, otherwise the following error happens
for imx_v6_v7_defconfig:

drivers/built-in.o: In function `gpmi_dma_filter':
clk-fixed-factor.c:(.text+0xb124c): undefined reference to `mxs_dma_is_apbh'
make: *** [vmlinux] Error 1

Signed-off-by: Fabio Estevam<redacted>

Acked-by: Sascha Hauer<s.hauer@pengutronix.de>

As mentioned elsewhere in this thread: We should not select user visible
options, so this patch is the only thing we can do atm (apart from
'fixing the tools' as David mentioned, but this is out of scope for an
-rc kernel)

I asked Shawn about this and it seems that this patch is the way to go 
for the moment. So:

Acked-by: Dirk Behme <redacted>

David: Artem: Building recent 3.6-rc1mainline with imx_v6_v7_defconfig 
is broken. We need this patch to get it working, again.

It would be nice if this patch could go as a fix into 3.6-rcX mainline 
asap. Could you help with this?

Many thanks and best regards

Dirk

Additionally the imx_v6_v7_defconfig should be adjusted so that the gpmi
nand driver actually gets built.

Sascha

quoted

---
Changes since v1:
- Use 'depends' rather than 'select'
  drivers/mtd/nand/Kconfig |    1 +
  1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a5d8a1b..da52c7d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig

@@ -463,6 +463,7 @@ config MTD_NAND_NANDSIM
  config MTD_NAND_GPMI_NAND
          bool "GPMI NAND Flash Controller driver"
          depends on MTD_NAND&&  (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
+	depends on MXS_DMA
          help
  	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
  	 The GPMI controller is very powerful, with the help of BCH
--

1.7.1