Op 3 aug. 2012, om 14:38 heeft Sourav Poddar [off-list ref] het volgende geschreven:
quoted hunk ↗ jump to hunk
Add keypad data node in omap5 device tree file.
Also fill the device tree binding parameters
with the required value in "omap5-evm" dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson <redacted>
Cc: Felipe Balbi <redacted>
Cc: Santosh Shilimkar <redacted>
Acked-by: Felipe Balbi <redacted>
Signed-off-by: Sourav Poddar <redacted>
---
arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++
arch/arm/boot/dts/omap5.dtsi | 5 +++++
2 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 45a8aeb..09fe941 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = < 0x02020073
+ 0x02030072
+ 0x020400e7
+ 0x02050066
+ 0x0206006b
+ 0x020700d9 >;
+ linux,input-no-autorepeat;
+ };
Again not a coment on your patch, but on DT:
If DT bindings must be OS independent, what then, is that linux keycode doing there?
regards,
Koen