Hello.

On 26-07-2012 12:36, Daniel Mack wrote:

quoted

quoted

Add Bosch D_CAN controller device tree data to AM33XX dtsi file
by adding d_can device node with all the necessary parameters.

quoted

quoted

Signed-off-by: AnilKumar Ch <redacted>
---
   arch/arm/boot/dts/am33xx.dtsi |    5 +++++
   1 file changed, 5 insertions(+)

quoted

quoted

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9b974dc..2db2ffb 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi

@@ -163,5 +163,10 @@
   			#size-cells = <0>;
   			ti,hwmods = "i2c3";
   		};
+
+		dcan1: d_can at 481D0000 {

     Address postfix in the node name and no "reg" property?

This still works due to the hwmod mappings OMAP relies on.

    I.e. the "reg" property is populated in runtime?

I would still
put it there, so the switch to real DT definitions will be less painful.

    How it helps anything?

Daniel

WBR, Sergei