[PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data

On 25.07.2012 14:43, Sergei Shtylyov wrote:

Hello.

On 25-07-2012 16:23, AnilKumar Ch wrote:

quoted

Add Bosch D_CAN controller device tree data to AM33XX dtsi file
by adding d_can device node with all the necessary parameters.

quoted

Signed-off-by: AnilKumar Ch <redacted>
---
  arch/arm/boot/dts/am33xx.dtsi |    5 +++++
  1 file changed, 5 insertions(+)

quoted

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9b974dc..2db2ffb 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi

@@ -163,5 +163,10 @@
  			#size-cells = <0>;
  			ti,hwmods = "i2c3";
  		};
+
+		dcan1: d_can at 481D0000 {

    Address postfix in the node name and no "reg" property?

This still works due to the hwmod mappings OMAP relies on. I would still
put it there, so the switch to real DT definitions will be less painful.


Daniel