[PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
From: Shawn Guo <hidden>
Date: 2012-05-10 06:48:19
Also in:
alsa-devel, linux-i2c
On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Richard Zhao <redacted> --- arch/arm/boot/dts/imx6q-sabrelite.dts | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 5b51deb..5a35bfd 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts@@ -110,4 +110,18 @@ regulator-always-on; }; }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias",
"Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
look like:
"Mic Jack", "Mic Bias",
"MIC_IN", "Mic Bias",
Regards,
Shawn
+ "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; -- 1.7.5.4