[PATCH] ARM: OMAP2+: voltage: ensure voltage used is exact voltage from OPP table

On 10:12-20120305, Kevin Hilman wrote:

Tero Kristo [off-list ref] writes:

quoted

On Fri, 2012-03-02 at 14:42 -0800, Kevin Hilman wrote:

quoted

When using the SMPS regulators to scale voltages, the regulator
framework may pass a minimum voltage that is not an exact OPP voltage.
For the VC/VP controlled voltage domains, we must ensure that the
voltage requested is the exact voltage from the OPP table.  This is
especially critical when using SR.

To fix, voltdm_scale() uses the target voltage passed to walk through
the OPP voltages until it finds a voltage that is >= one of the OPP
voltages.

I have just one question to this, how about smartreflex class1p5? Do we
have any plans for that one? The old implementation at least was using
voltdm_scale, so if we modify this function, smartreflex class1p5
doesn't work anymore.

Since it's not in mainline, that is not my concern at the moment.  We
can worry about SR1.5 when I someone is motivated to push it upstream.

quoted

Otherwise this patch looks good to me.

Other than the minor misgiving of having to re-verify the voltage on
every scale, I am OK with it as well.

That said, I don't see why this should break class 1.5/3.5 support.

-- 
Regards,
Nishanth Menon