[PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect

On Mon, Mar 5, 2012 at 3:55 PM, T Krishnamoorthy, Balaji
[off-list ref] wrote:

On Mon, Mar 5, 2012 at 2:46 PM, Rajendra Nayak [off-list ref] wrote:

quoted

On Friday 02 March 2012 10:52 PM, Tony Lindgren wrote:

quoted

BTW, with -rc5, looks like re-inserting omap_hsmmc on omap4 fails
to detect any cards, and then fails to unload. This works on omap3
just fine. Any ideas why that would be?

Yeah, looks like thats broken. I am not sure whats going wrong though.
I just enabled CONFIG_MMC_DEBUG and saw these logs below.

Venkat/Balaji, care to look at this one?

Let me check this

OMAP4 and OMAP3 HSMMC IP registers differ by 0x100 offset.
Addng the offset to platform_device resource structure
increments the start address for every insmod operation.
MMC command fails on re-insertion as module due incorrect register base.
Fix this by updating the ioremap base address only.

Signed-off-by: Balaji T K <redacted>
---
Note:  eMMC detection is still failing on resertion due to card vcc
power off on rmmod

 drivers/mmc/host/omap_hsmmc.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index fd0c661..4e1f8f6 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c

@@ -1870,8 +1870,6 @@ static int __init omap_hsmmc_probe(struct

platform_device *pdev)
 	if (res == NULL || irq < 0)
 		return -ENXIO;

-	res->start += pdata->reg_offset;
-	res->end += pdata->reg_offset;
 	res = request_mem_region(res->start, resource_size(res), pdev->name);
 	if (res == NULL)
 		return -EBUSY;

@@ -1896,7 +1894,7 @@ static int __init omap_hsmmc_probe(struct

platform_device *pdev)
 	host->irq	= irq;
 	host->id	= pdev->id;
 	host->slot_id	= 0;
-	host->mapbase	= res->start;
+	host->mapbase	= res->start + pdata->reg_offset;
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
 	host->next_data.cookie = 1;
-- 
1.7.0.4

quoted

# insmod omap_hsmmc.ko
[ ? 43.358398] omap_hsmmc omap_hsmmc.0: context was not lost
[ ? 43.364105] omap_hsmmc omap_hsmmc.0: enabled
[ ? 44.434661] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
timing 0
[ ? 44.442352] omap_hsmmc omap_hsmmc.0: Set clock to 0Hz
[ ? 44.474365] omap_hsmmc omap_hsmmc.0: disabled
[ ? 44.482208] omap_hsmmc omap_hsmmc.4: context was not lost
[ ? 44.482208] omap_hsmmc omap_hsmmc.4: enabled
[ ? 44.546600] omap_hsmmc omap_hsmmc.0: context was not lost
[ ? 44.552276] omap_hsmmc omap_hsmmc.0: enabled
[ ? 44.552276] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ ? 44.563720] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 18 width 0
timing 0
[ ? 44.572174] omap_hsmmc omap_hsmmc.0: Set clock to 0Hz
[ ? 44.613800] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 18 width
0 timing 0
[ ? 44.621887] omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
[ ? 44.735290] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ ? 44.741271] omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x00000c00
[ ? 45.560241] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
timing 0
[ ? 45.567871] omap_hsmmc omap_hsmmc.4: Set clock to 0Hz
[ ? 45.591491] omap_hsmmc omap_hsmmc.4: disabled
#
#
# rmmod omap_hsmmc
[ ?607.302307] omap_hsmmc omap_hsmmc.4: context was not lost
[ ?607.308044] omap_hsmmc omap_hsmmc.4: enabled
[ ?607.312591] omap_hsmmc omap_hsmmc.4: disabled
[ ?607.317199] omap_hsmmc omap_hsmmc.4: context was not lost
[ ?607.322875] omap_hsmmc omap_hsmmc.4: enabled

-- 
Thanks and Regards,
Balaji T K