[PATCH 1/3] Kbuild: centralize MKIMAGE and cmd_uimage definitions
From: Stephen Warren <hidden>
Date: 2012-03-07 00:30:50
Also in:
linux-arch, linux-kbuild, linux-sh, lkml, sparclinux
Subsystem:
arm port, kernel build + files below scripts/ (unless maintained elsewhere), microblaze architecture, sparc + ultrasparc (sparc/sparc64), superh, the rest · Maintainers:
Russell King, Nathan Chancellor, Nicolas Schier, Michal Simek, "David S. Miller", Andreas Larsson, Yoshinori Sato, Rich Felker, John Paul Adrian Glaubitz, Linus Torvalds
All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib to avoid duplication. All ARCHs have similar definitions of cmd_uimage. Place a sufficiently parameterized version in Makefile.lib to avoid duplication. The centralized cmd_uimage definition will allow the future introduction of a centralized Kconfig option to make cmd_uimage use -T kernel_noload rather than -T kernel. Signed-off-by: Stephen Warren <redacted> --- NOTE: I have not tested this patch in any way at all for architectures other than ARM. arch/arm/boot/Makefile | 23 +++++++++-------------- arch/avr32/boot/images/Makefile | 9 +++------ arch/blackfin/boot/Makefile | 19 ++++++++----------- arch/microblaze/boot/Makefile | 10 +++------- arch/sh/boot/Makefile | 8 ++------ arch/sparc/boot/Makefile | 9 +++------ arch/unicore32/boot/Makefile | 12 ++---------- scripts/Makefile.lib | 24 ++++++++++++++++++++++++ 8 files changed, 54 insertions(+), 60 deletions(-)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index fc871e7..c877087 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile@@ -11,8 +11,6 @@ # Copyright (C) 1995-2002 Russell King # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif
@@ -69,22 +67,19 @@ $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) clean-files := *.dtb -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(STARTADDR) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ - -ifeq ($(CONFIG_ZBOOT_ROM),y) -$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) +ifneq ($(LOADADDR),) + UIMAGE_LOADADDR=$(LOADADDR) else -$(obj)/uImage: LOADADDR=$(ZRELADDR) + ifeq ($(CONFIG_ZBOOT_ROM),y) + UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) + else + UIMAGE_LOADADDR=$(ZRELADDR) + endif endif -$(obj)/uImage: STARTADDR=$(LOADADDR) - check_for_multiple_loadaddr = \ -if [ $(words $(LOADADDR)) -gt 1 ]; then \ - echo 'multiple load addresses: $(LOADADDR)'; \ +if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \ echo 'This is incompatible with uImages'; \ echo 'Specify LOADADDR on the commandline to build an uImage'; \ false; \
diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile
index 1848bf0..c9d8ab5 100644
--- a/arch/avr32/boot/images/Makefile
+++ b/arch/avr32/boot/images/Makefile@@ -6,8 +6,6 @@ # for more details. # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - extra-y := vmlinux.bin vmlinux.gz OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
@@ -17,10 +15,9 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T kernel \ - -C gzip -a $(CONFIG_LOAD_ADDRESS) -e $(CONFIG_ENTRY_ADDRESS) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ +UIMAGE_LOADADDR = $(CONFIG_LOAD_ADDRESS +UIMAGE_ENTRYADDR = $(CONFIG_ENTRY_ADDRESS) +UIMAGE_COMPRESSION = gzip targets += uImage uImage.srec $(obj)/uImage: $(obj)/vmlinux.gz
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index 0a49279..6d2690a 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile@@ -6,20 +6,17 @@ # for more details. # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip -UIMAGE_OPTS-y := -UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD) -UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n '$(CPU_REV)-$(KERNELRELEASE)' \ - -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ - $(UIMAGE_OPTS-y) -d $< $@ +ifeq ($(CONFIG_RAMKERNEL),y) +UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD) +else # CONFIG_ROMKERNEL must be set +UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD) +endif +UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') +UIMAGE_NAME = '$(CPU_REV)-$(KERNELRELEASE)' +UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -x $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy)
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 0c796cf..ca76ecd 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile@@ -2,8 +2,6 @@ # arch/microblaze/boot/Makefile # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - obj-y += linked_dtb.o targets := linux.bin linux.bin.gz simpleImage.%
@@ -35,11 +33,9 @@ quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \ -K _fdt_start vmlinux -o $@ -quiet_cmd_uimage = UIMAGE $@.ub - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \ - -C none -n 'Linux-$(KERNELRELEASE)' \ - -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \ - -d $@ $@.ub +UIMAGE_IN = $@ +UIMAGE_OUT = $@.ub +UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR) $(obj)/simpleImage.%: vmlinux FORCE $(call if_changed,cp,.unstrip)
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index e4ea31a..58592df 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile@@ -8,8 +8,6 @@ # Copyright (C) 1999 Stuart Menefy # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - # # Assign safe dummy values if these variables are not defined, # in order to suppress error message.
@@ -61,10 +59,8 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $(KERNEL_MEMORY) + \ $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ +UIMAGE_LOADADDR = $(KERNEL_LOAD) +UIMAGE_ENTRYADDR = $(KERNEL_ENTRY) $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy)
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 9205416..19e1bc7 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile@@ -5,7 +5,6 @@ ROOT_IMG := /usr/src/root.img ELFTOAOUT := elftoaout -MKIMAGE := $(srctree)/scripts/mkuboot.sh hostprogs-y := piggyback btfixupprep targets := tftpboot.img btfix.o btfix.S image zImage vmlinux.aout
@@ -92,11 +91,9 @@ $(obj)/image.bin: $(obj)/image FORCE $(obj)/image.gz: $(obj)/image.bin $(call if_changed,gzip) -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sparc -O linux -T kernel \ - -C gzip -a $(CONFIG_UBOOT_LOAD_ADDR) \ - -e $(CONFIG_UBOOT_ENTRY_ADDR) -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ +UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR +UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR) +UIMAGE_COMPRESSION = gzip quiet_cmd_uimage.o = UIMAGE.O $@ cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile
index 79e5f88..ec7fb70 100644
--- a/arch/unicore32/boot/Makefile
+++ b/arch/unicore32/boot/Makefile@@ -11,8 +11,6 @@ # Copyright (C) 2001~2010 GUAN Xue-tao # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - targets := Image zImage uImage $(obj)/Image: vmlinux FORCE
@@ -26,14 +24,8 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) @echo ' Kernel: $@ is ready' -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A unicore -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(STARTADDR) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ - -$(obj)/uImage: LOADADDR=0x0 - -$(obj)/uImage: STARTADDR=$(LOADADDR) +UIMAGE_ARCH = unicore +UIMAGE_LOADADDR = 0x0 $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 00c368c..7b0be18 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib@@ -304,6 +304,30 @@ cmd_lzo = (cat $(filter-out FORCE,$^) | \ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ (rm -f $@ ; false) +# U-Boot mkimage +# --------------------------------------------------------------------------- + +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces +# the number of overrides in arch makefiles +UIMAGE_ARCH = $(SRCARCH) +UIMAGE_COMPRESSION = $(if $(2),$(2),none) +UIMAGE_OPTS-y = +UIMAGE_TYPE = kernel +UIMAGE_LOADADDR=arch_must_set_this +UIMAGE_ENTRYADDR=$(UIMAGE_LOADADDR) +UIMAGE_NAME = 'Linux-$(KERNELRELEASE)' +UIMAGE_IN = $< +UIMAGE_OUT = $@ + +quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT) + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ + -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ + -T $(UIMAGE_TYPE) \ + -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ + -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT) + # XZ # --------------------------------------------------------------------------- # Use xzkern to compress the kernel image and xzmisc to compress other things.
--
1.7.0.4