[PATCH v2] ARM: OMAP1: ams-delta: clean up init data section assignments
From: Janusz Krzysztofik <hidden>
Date: 2012-02-10 16:48:43
Also in:
linux-fbdev, linux-input, linux-omap
Subsystem:
arm port, framebuffer layer, input (keyboard, mouse, joystick, touchscreen) drivers, memory technology devices (mtd), nand flash subsystem, omap1 support, the rest · Maintainers:
Russell King, Helge Deller, Dmitry Torokhov, Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Aaro Koskinen, Janusz Krzysztofik, Linus Torvalds
The main purpose of this patch is to fix several section mismatch warnings from the board file and a few board specific drivers, introduced with recent Amstrad Delta patch series, some of them rising up only when building with CONFIG_MODULES not set. While being at it, section tagging of all init data found in the board file have been revised and hopefully corrected and/or optimized. Created and tested on top of current linux-omap/omap1, commit 967809bd7faf71ddc29c8081e0f21db8b201a0f4. Signed-off-by: Janusz Krzysztofik <redacted> --- arch/arm/mach-omap1/board-ams-delta.c | 18 +++++++++--------- drivers/input/serio/ams_delta_serio.c | 2 +- drivers/mtd/nand/ams-delta.c | 2 +- drivers/video/omap/lcd_ams_delta.c | 2 +- 4 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 87b1303..bfe6fd1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c@@ -150,7 +150,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", };
@@ -167,7 +167,7 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { #define LATCH1_GPIO_BASE 232 #define LATCH1_NGPIO 8 -static struct resource latch1_resources[] __initconst = { +static struct resource latch1_resources[] = { [0] = { .name = "dat", .start = LATCH1_PHYS,
@@ -176,7 +176,7 @@ static struct resource latch1_resources[] __initconst = { }, }; -static struct bgpio_pdata latch1_pdata __initconst = { +static struct bgpio_pdata latch1_pdata = { .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, };
@@ -191,7 +191,7 @@ static struct platform_device latch1_gpio_device = { }, }; -static struct resource latch2_resources[] __initconst = { +static struct resource latch2_resources[] = { [0] = { .name = "dat", .start = LATCH2_PHYS,
@@ -200,7 +200,7 @@ static struct resource latch2_resources[] __initconst = { }, }; -static struct bgpio_pdata latch2_pdata __initconst = { +static struct bgpio_pdata latch2_pdata = { .base = AMS_DELTA_LATCH2_GPIO_BASE, .ngpio = AMS_DELTA_LATCH2_NGPIO, };
@@ -215,7 +215,7 @@ static struct platform_device latch2_gpio_device = { }, }; -static struct gpio latch_gpios[] __initconst = { +static const struct gpio latch_gpios[] __initconst = { { .gpio = LATCH1_GPIO_BASE + 6, .flags = GPIOF_OUT_INIT_LOW,
@@ -322,7 +322,7 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct gpio_led gpio_leds[] __initconst = { +static const struct gpio_led gpio_leds[] __initconst = { { .name = "camera", .gpio = LATCH1_GPIO_BASE + 0,
@@ -358,7 +358,7 @@ static struct gpio_led gpio_leds[] __initconst = { }, }; -static struct gpio_led_platform_data leds_pdata __initconst = { +static const struct gpio_led_platform_data leds_pdata __initconst = { .leds = gpio_leds, .num_leds = ARRAY_SIZE(gpio_leds), };
@@ -415,7 +415,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_camera_device, }; -static struct platform_device *late_devices[] __initconst = { +static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, };
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 0571e2e..bd5b10e 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c@@ -103,7 +103,7 @@ static void ams_delta_serio_close(struct serio *serio) gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); } -static struct gpio ams_delta_gpios[] __initconst_or_module = { +static const struct gpio ams_delta_gpios[] __initconst_or_module = { { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, .flags = GPIOF_DIR_IN,
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 85934dc..7341695 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c@@ -145,7 +145,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } -static struct gpio _mandatory_gpio[] __initconst_or_module = { +static const struct gpio _mandatory_gpio[] = { { .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, .flags = GPIOF_OUT_INIT_HIGH,
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 0e71e28..d3a3113 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c@@ -99,7 +99,7 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ -static struct gpio _gpios[] __initconst_or_module = { +static const struct gpio _gpios[] = { { .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, .flags = GPIOF_OUT_INIT_LOW,
--
1.7.3.4