[PATCH 1/1] regulator/fixed: pass regulator_register of_node

[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2011-12-30
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Mark Brown <hidden> · 2011-12-30
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2011-12-30
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Mark Brown <hidden> · 2011-12-30
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2011-12-30
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Mark Brown <hidden> · 2011-12-31
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2011-12-31
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Mark Brown <hidden> · 2011-12-31
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2012-01-02
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Mark Brown <hidden> · 2012-01-02
[PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0 · Richard Zhao <hidden> · 2012-01-04
[PATCH 1/1] regulator/fixed: pass regulator_register of_node · Richard Zhao <hidden> · 2011-12-31
[PATCH 1/1] regulator/fixed: pass regulator_register of_node · Mark Brown <hidden> · 2012-01-02
[PATCH 1/1] regulator/fixed: pass regulator_register of_node · Richard Zhao <hidden> · 2012-01-02
[PATCH v2 1/1] regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config · Richard Zhao <hidden> · 2012-01-04
Re: [PATCH v2 1/1] regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config · Richard Zhao <hidden> · 2012-01-06
Re: [PATCH v2 1/1] regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config · Mark Brown <hidden> · 2012-01-06
Re: [PATCH v2 1/1] regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config · Mark Brown <hidden> · 2012-01-06

STALE5263d

From: Mark Brown <hidden>
Date: 2012-01-02 12:46:06

On Sat, Dec 31, 2011 at 08:51:16PM +0800, Richard Zhao wrote:

regulator_get needs of_node to find right regulator.

Signed-off-by: Richard Zhao <redacted>

Applied, thanks, but please always use subject lines that match the
subsystem you're submitting against.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help