[PATCH v4 2/4] ARM: pxa168: Add SDHCI support

v2 - clock register for SDHCI are not common across all MMP SoCs.
? ? So, move PXA168 implementation to pxa168.c

v3 - sdhci-pxav1 driver code is merged with sdhci-pxav2. So, change
? ? the device name accordingly
? - start sdhci device numbering from 1 as other PXA168 devices
? ? does that

v4 - Use different names for SD clock registers for PXA168 instead
? ? of redefining them in pxa168.c. Suggested by Haojian Zhuang

Signed-off-by: Tanmay Upadhyay <redacted>
Reviewed-by: Philip Rakity <redacted>
---
?arch/arm/mach-mmp/include/mach/pxa168.h ? ?| ? 20 ++++++++++++++
?arch/arm/mach-mmp/include/mach/regs-apmu.h | ? 40 ++++++++++++++-------------
?arch/arm/mach-mmp/pxa168.c ? ? ? ? ? ? ? ? | ? 39 +++++++++++++++++++++++++++
?3 files changed, 80 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..a181608 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h

@@ -15,6 +15,7 @@ extern void pxa168_clear_keypad_wakeup(void);

?#include <plat/pxa27x_keypad.h>
?#include <mach/cputype.h>
?#include <linux/pxa168_eth.h>
+#include <linux/platform_data/pxa_sdhci.h>

?extern struct pxa_device_desc pxa168_device_uart1;
?extern struct pxa_device_desc pxa168_device_uart2;

@@ -34,6 +35,10 @@ extern struct pxa_device_desc pxa168_device_nand;

?extern struct pxa_device_desc pxa168_device_fb;
?extern struct pxa_device_desc pxa168_device_keypad;
?extern struct pxa_device_desc pxa168_device_eth;
+extern struct pxa_device_desc pxa168_device_sdh1;
+extern struct pxa_device_desc pxa168_device_sdh2;
+extern struct pxa_device_desc pxa168_device_sdh3;
+extern struct pxa_device_desc pxa168_device_sdh4;

?struct pxa168_usb_pdata {
? ? ? ?/* If NULL, default phy init routine for PXA168 would be called */

@@ -132,4 +137,19 @@ static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)

?{
? ? ? ?return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
?}
+
+static inline int pxa168_add_sdh(int id, struct sdhci_pxa_platdata *data)
+{
+ ? ? ? struct pxa_device_desc *d = NULL;
+
+ ? ? ? switch (id) {
+ ? ? ? case 1: d = &pxa168_device_sdh1; break;
+ ? ? ? case 2: d = &pxa168_device_sdh2; break;
+ ? ? ? case 3: d = &pxa168_device_sdh3; break;
+ ? ? ? case 4: d = &pxa168_device_sdh4; break;
+ ? ? ? default:
+ ? ? ? ? ? ? ? return -EINVAL;
+ ? ? ? }
+ ? ? ? return pxa_register_device(d, data, sizeof(*data));
+}
?#endif /* __ASM_MACH_PXA168_H */

diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 8447ac6..a84de77 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h

@@ -17,27 +17,29 @@

?#define APMU_REG(x) ? ?(APMU_VIRT_BASE + (x))

?/* Clock Reset Control */
-#define APMU_IRE ? ? ? APMU_REG(0x048)
-#define APMU_LCD ? ? ? APMU_REG(0x04c)
-#define APMU_CCIC ? ? ?APMU_REG(0x050)
-#define APMU_SDH0 ? ? ?APMU_REG(0x054)
-#define APMU_SDH1 ? ? ?APMU_REG(0x058)
-#define APMU_USB ? ? ? APMU_REG(0x05c)
-#define APMU_NAND ? ? ?APMU_REG(0x060)
-#define APMU_DMA ? ? ? APMU_REG(0x064)
-#define APMU_GEU ? ? ? APMU_REG(0x068)
-#define APMU_BUS ? ? ? APMU_REG(0x06c)
-#define APMU_SDH2 ? ? ?APMU_REG(0x0e8)
-#define APMU_SDH3 ? ? ?APMU_REG(0x0ec)
-#define APMU_ETH ? ? ? APMU_REG(0x0fc)
-
-#define APMU_FNCLK_EN ?(1 << 4)
-#define APMU_AXICLK_EN (1 << 3)
-#define APMU_FNRST_DIS (1 << 1)
-#define APMU_AXIRST_DIS ? ? ? ?(1 << 0)
+#define APMU_IRE ? ? ? ? ? ? ? APMU_REG(0x048)
+#define APMU_LCD ? ? ? ? ? ? ? APMU_REG(0x04c)
+#define APMU_CCIC ? ? ? ? ? ? ?APMU_REG(0x050)
+#define APMU_SDH0 ? ? ? ? ? ? ?APMU_REG(0x054)
+#define APMU_SDH1 ? ? ? ? ? ? ?APMU_REG(0x058)
+#define APMU_USB ? ? ? ? ? ? ? APMU_REG(0x05c)
+#define APMU_NAND ? ? ? ? ? ? ?APMU_REG(0x060)
+#define APMU_DMA ? ? ? ? ? ? ? APMU_REG(0x064)
+#define APMU_GEU ? ? ? ? ? ? ? APMU_REG(0x068)
+#define APMU_BUS ? ? ? ? ? ? ? APMU_REG(0x06c)
+#define APMU_PXA168_SDH2 ? ? ? APMU_REG(0x0e0)
+#define APMU_PXA168_SDH3 ? ? ? APMU_REG(0x0e4)
+#define APMU_SDH2 ? ? ? ? ? ? ?APMU_REG(0x0e8)
+#define APMU_SDH3 ? ? ? ? ? ? ?APMU_REG(0x0ec)
+#define APMU_ETH ? ? ? ? ? ? ? APMU_REG(0x0fc)
+
+#define APMU_FNCLK_EN ? ? ? ? ?(1 << 4)
+#define APMU_AXICLK_EN ? ? ? ? (1 << 3)
+#define APMU_FNRST_DIS ? ? ? ? (1 << 1)
+#define APMU_AXIRST_DIS ? ? ? ? ? ? ? ?(1 << 0)

?/* Wake Clear Register */
-#define APMU_WAKE_CLR ?APMU_REG(0x07c)
+#define APMU_WAKE_CLR ? ? ? ? ?APMU_REG(0x07c)

?#define APMU_PXA168_KP_WAKE_CLR ? ? ? ? ? ? ? ?(1 << 7)
?#define APMU_PXA168_CFI_WAKE_CLR ? ? ? (1 << 6)

diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..023659b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c

@@ -65,6 +65,32 @@ void __init pxa168_init_irq(void)

? ? ? ?pxa168_init_gpio();
?}

+static void sdh_clk_enable(struct clk *clk)
+{
+ ? ? ? void __iomem *reg_offset = clk->clk_rst;
+
+ ? ? ? /* Can't see any clean way to do this: Bits 3 & 0 in registers
+ ? ? ? ?* for host 0 & 2 should be set for host 1 & 3 also */
+ ? ? ? if (reg_offset == APMU_SDH0 || reg_offset == APMU_SDH1)
+ ? ? ? ? ? ? ? __raw_writel(__raw_readl(APMU_SDH0) | 0x9, APMU_SDH0);
+ ? ? ? if (reg_offset == APMU_PXA168_SDH2 || reg_offset == APMU_PXA168_SDH3)
+ ? ? ? ? ? ? ? __raw_writel(__raw_readl(APMU_PXA168_SDH2) | 0x9,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? APMU_PXA168_SDH2);
+
+ ? ? ? __raw_writel(__raw_readl(clk->clk_rst) | clk->enable_val, clk->clk_rst);
+}
+

+static void sdh_clk_disable(struct clk *clk)
+{
+ ? ? ? __raw_writel(__raw_readl(clk->clk_rst) & ~(clk->enable_val),
+ ? ? ? ? ? ? ? ? ? ? ? clk->clk_rst);
+}
+
+struct clkops sdh_clk_ops = {
+ ? ? ? .enable ? ? ? ? = sdh_clk_enable,
+ ? ? ? .disable ? ? ? ?= sdh_clk_disable,
+};
+
?/* APB peripheral clocks */
?static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
?static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);

@@ -87,6 +113,11 @@ static APMU_CLK(lcd, LCD, 0x7f, 312000000);

?static APMU_CLK(eth, ETH, 0x09, 0);
?static APMU_CLK(usb, USB, 0x12, 0);

+static APMU_CLK_OPS(sdh1, SDH0, 0x12, 48000000, &sdh_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH1, 0x12, 48000000, &sdh_clk_ops);
+static APMU_CLK_OPS(sdh3, PXA168_SDH2, 0x12, 48000000, &sdh_clk_ops);
+static APMU_CLK_OPS(sdh4, PXA168_SDH3, 0x12, 48000000, &sdh_clk_ops);
+
?/* device and clock bindings */
?static struct clk_lookup pxa168_clkregs[] = {
? ? ? ?INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),

@@ -108,6 +139,10 @@ static struct clk_lookup pxa168_clkregs[] = {

? ? ? ?INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
? ? ? ?INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
? ? ? ?INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+ ? ? ? INIT_CLKREG(&clk_sdh1, NULL, "PXA-SDHCLK"),
+ ? ? ? INIT_CLKREG(&clk_sdh2, NULL, "PXA-SDHCLK"),
+ ? ? ? INIT_CLKREG(&clk_sdh3, NULL, "PXA-SDHCLK"),
+ ? ? ? INIT_CLKREG(&clk_sdh4, NULL, "PXA-SDHCLK"),
?};

?static int __init pxa168_init(void)

@@ -173,6 +208,10 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);

?PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
?PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
?PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+PXA168_DEVICE(sdh1, "sdhci-pxav2", 0, SDH1, 0xd4280000, 0x100);
+PXA168_DEVICE(sdh2, "sdhci-pxav2", 1, SDH1, 0xd4281000, 0x100);
+PXA168_DEVICE(sdh3, "sdhci-pxav2", 2, SDH2, 0xd427e000, 0x100);
+PXA168_DEVICE(sdh4, "sdhci-pxav2", 3, SDH2, 0xd427f000, 0x100);

?struct resource pxa168_usb_host_resources[] = {
? ? ? ?/* USB Host conroller register base */
--
1.7.0.4